MTD OEM-731-2643 Genuine Parts Accessories Snow Thrower Chute Clearing Tool

4.7 4.7 out of 5 stars | 520 ratings

Price: 15.32

Last update: 02-03-2025


About this item

Safely and easily cleans snow and ice from snow thrower discharge chutes
Replaces O.E. # 931-2643, 731-2643
Chute clearing tool for snow thrower

Product information


Top reviews from the United States

  • SCA
    5.0 out of 5 stars MTD OEM-731-2643 Chute Clearing Tool
    Reviewed in the United States on January 25, 2024
    The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
    Video Player is loading.
    Current Time 0:00
    Duration 0:31
    Loaded: 19.37%
    Stream Type LIVE
    Remaining Time 0:31
     
    1x
    I will start by saying that my 25+ year-old snow thrower did not come with one of these chute clearing tools, so I had to install it from scratch.

    The few snowfalls we've had this year were heavy and wet causing the chute to get clogged several times. I used whatever I could find to clear it out wasting precious time. I've been wanting to get one of these attachments for several years and finally broke down and ordered one.

    The tool came with the plastic mounting bracket as well as with a template and mounting instructions; there is no need for hardware. I followed the instructions exactly as written and had absolutely no issues. You need to center the template wherever you intend to install the tool, then use a center punch or tip of something pointed to make a starting point for your drill bit. Once that is done, use a 1/8-inch drill bit to drill a pilot hole. After the pilot hole has been drilled, use a 11/32-inch drill bit to drill the finished hole. The second size (11/32) must not be very common because I looked through 3 different drill bit sets that I had and none of the sets contained that size. I wanted this done right and not use the next size up or down, so I went out to the local hardware store and spent a few dollars on the right sized bit.

    I finished up drilling the holes, removed any burrs, and pressed the plastic bracket clips into the holes and voila, it fits perfectly (note: It did take a little bit of force, but once in, it stayed in). The finished mounting seems very sturdy, and I was able to insert and remove the tool without worrying about the bracket coming out of the holes (see my attached video). I assume some of the other reviewers who had issues may have used the wrong sized drill bit for their holes, or the thickness of the metal where they mounted their brackets is a little thinner or thicker. Nonetheless the mount seems solid.

    The tool itself is made of solid plastic and seems well-made. It is much better than anything offered at the home improvement stores and at least two-thirds to half the price. For what I spent, it will be a much better option than what I was doing before. Plus, now it will be readily available whenever I need it. I believe it will serve its intended purpose. Once I get to use it, I will update this review.
    Customer image
    SCA
    5.0 out of 5 stars
    MTD OEM-731-2643 Chute Clearing Tool

    Reviewed in the United States on January 25, 2024
    I will start by saying that my 25+ year-old snow thrower did not come with one of these chute clearing tools, so I had to install it from scratch.

    The few snowfalls we've had this year were heavy and wet causing the chute to get clogged several times. I used whatever I could find to clear it out wasting precious time. I've been wanting to get one of these attachments for several years and finally broke down and ordered one.

    The tool came with the plastic mounting bracket as well as with a template and mounting instructions; there is no need for hardware. I followed the instructions exactly as written and had absolutely no issues. You need to center the template wherever you intend to install the tool, then use a center punch or tip of something pointed to make a starting point for your drill bit. Once that is done, use a 1/8-inch drill bit to drill a pilot hole. After the pilot hole has been drilled, use a 11/32-inch drill bit to drill the finished hole. The second size (11/32) must not be very common because I looked through 3 different drill bit sets that I had and none of the sets contained that size. I wanted this done right and not use the next size up or down, so I went out to the local hardware store and spent a few dollars on the right sized bit.

    I finished up drilling the holes, removed any burrs, and pressed the plastic bracket clips into the holes and voila, it fits perfectly (note: It did take a little bit of force, but once in, it stayed in). The finished mounting seems very sturdy, and I was able to insert and remove the tool without worrying about the bracket coming out of the holes (see my attached video). I assume some of the other reviewers who had issues may have used the wrong sized drill bit for their holes, or the thickness of the metal where they mounted their brackets is a little thinner or thicker. Nonetheless the mount seems solid.

    The tool itself is made of solid plastic and seems well-made. It is much better than anything offered at the home improvement stores and at least two-thirds to half the price. For what I spent, it will be a much better option than what I was doing before. Plus, now it will be readily available whenever I need it. I believe it will serve its intended purpose. Once I get to use it, I will update this review.
    Images in this review
  • Amazon Customer
    5.0 out of 5 stars Works as advertied, very sturdy!
    Reviewed in the United States on November 13, 2024
    Ordered as a replacement, got a second one for my other blower that did not come with a cleanout tool!
  • Fishing Show
    5.0 out of 5 stars Good Product
    Reviewed in the United States on January 17, 2025
    I had one of these with my last snowblowers, but the EGO didn't come with one, so I decided to get one like I had. It will not be attached to the electric blower, but should work nicely.
  • fotoguy
    4.0 out of 5 stars an effective tool
    Reviewed in the United States on April 26, 2024
    This product came after my snow thrower, so there's no easy place to secure it AND make it easy to detach and re-attach.
  • Mark W
    5.0 out of 5 stars Perfect replacement
    Reviewed in the United States on January 25, 2025
    Fit perfectly into the holder on my Craftsman snowblower.
  • ARTHUR LEAHY
    5.0 out of 5 stars Exactly as described
    Reviewed in the United States on January 19, 2025
    Good product
  • Grandpop
    5.0 out of 5 stars Not the sturdiest chute shovel.
    Reviewed in the United States on January 14, 2023
    It came quickly, way quicker than I expected especially because I ordered it around the holidays. It looks just like the pictures and installation was simple. Know that if you are putting this on your snowblower and your blower didnt come with one attached you will need to drill holes to mount it. It comes with a template so your holes are perfectly spaced and it snaps into place. As for the shovel itself, it's not the sturdiest but it works. I was kind of afraid it was gonna snap in half every time I have used it and the business end of the shovel is tiny, like less than 2" across. Now it's perfect for my old craftsman snowblower as it's discharge port I'd a rectangle little more than 2" x 5" but if you have a larger chute port maybe you'd like something bigger or a bit wider but it works well and I would probably buy it again. For the price it's a great buy. For what it's worth, I recommend it.
  • HOMER THE REVIEWER
    5.0 out of 5 stars Very Happy With The Quality Of This Snow Thrower Chute Clearing Tool And Its Attachment Piece
    Reviewed in the United States on December 5, 2020
    Very Happy With The Quality Of This Snow Thrower Chute Clearing Tool And Its Attachment Piece That Comes With It. This is an MTD OEM-731-2643 Snow Thrower Chute Clearing Tool but can also be Universal if you can drill the holes. I bought it for my Ariens ST-724. It does come with a template you can use to pre-drill and drill your holes so make sure you do not discard it before you put it on. It will give you the size of the holes you will need to drill. (This is if you are using it as a Universal Fit otherwise your holes will already be aligned.) Finally, it is a good idea to warm up the plastic inserts that are on the bracket a little to room temperature if you are putting them on in the Winter. I accomplish this with my hair dryer. Worked really well. After inserting the holding bracket the warmed up inserts will cool up to existing temperatures and remain fixed.

    It was one of the easier things I have installed and the instructions are pretty clear and concise. This Clearing Tool will be an asset to my snow thrower this year!
    Customer image
    HOMER THE REVIEWER
    5.0 out of 5 stars
    Very Happy With The Quality Of This Snow Thrower Chute Clearing Tool And Its Attachment Piece

    Reviewed in the United States on December 5, 2020
    Very Happy With The Quality Of This Snow Thrower Chute Clearing Tool And Its Attachment Piece That Comes With It. This is an MTD OEM-731-2643 Snow Thrower Chute Clearing Tool but can also be Universal if you can drill the holes. I bought it for my Ariens ST-724. It does come with a template you can use to pre-drill and drill your holes so make sure you do not discard it before you put it on. It will give you the size of the holes you will need to drill. (This is if you are using it as a Universal Fit otherwise your holes will already be aligned.) Finally, it is a good idea to warm up the plastic inserts that are on the bracket a little to room temperature if you are putting them on in the Winter. I accomplish this with my hair dryer. Worked really well. After inserting the holding bracket the warmed up inserts will cool up to existing temperatures and remain fixed.

    It was one of the easier things I have installed and the instructions are pretty clear and concise. This Clearing Tool will be an asset to my snow thrower this year!
    Images in this review

  • Best Sellers in

     
     

    PowerSmart Snow Blower Gas Powered 24 in. 2-Stage 212cc Engine with Electric Start, LED Light, Self Propelled

    4 4 out of 5 stars 164
    699
     
     

    Snow Joe 18-Inch Snow Shovel with Assist Handle, Heavy Duty Shovels, Shovelution, Red

    4.4 4.4 out of 5 stars 27,319
    35.24
     
     

    Snow Joe 324E Electric Snow Shovel w/Headlights, 11-Inch, 10 Amp w/Lights, Blue

    4.1 4.1 out of 5 stars 4,736
    99
     
     

    36" Length - Reflective, Universal, Unbreakable Orange Snow Plow Guide Markers- Steel Wire Inside (2)

    4.6 4.6 out of 5 stars 154
    29.95
     
     

    JSP Manufacturing V2-MINI Roof Guard Snow Guard Prevent Sliding Ice Snow Stop Buildup Plastic Multipack-Multicolor (25, Dark

    4.5 4.5 out of 5 stars 98
    23.98
     
     

    AR-PRO (2-Pack) Replacement Snow Plow Skid Shoes - Replaces Part ATV UTV Polaris K-Plow Nos 2205071 and 2208864 - Hardened St

    4.5 4.5 out of 5 stars 176
    15.99
     
     

    V2-Mini Roof Guard Snow Guard Prevent Sliding Ice Snow Stop Buildup Plastic Multipack-Multicolor (50, Clear)

    4.8 4.8 out of 5 stars 35
    42.98
     
     

    490-241-0010 Universal Snow Thrower Slide Shoes - Fits Most 2-Stage and 3-Stage Snow Throwers - Made with Durable Polyurethan

    4.5 4.5 out of 5 stars 306
    14.99