Duco ABS Plastic Sheet 1/8 Inch Thick 12" x 12" - Pack of 1 Rigid ABS Sheet with Textured Plastic Front - 0.125" Thick Heat M

4.7 | 724 ratings

Price: 8.25

Last update: 01-10-2025

About this item

DURABLE - Duco's ABS plastic sheet plastic panel hosts extremely high tensile strength and impact resistance due to the makeup of the firm ABS material. Unlike MDF, HDPE, HDU, and PVC, ABS plastic sheeting is a great and more economical solution for heavy-duty applications
MOLDABLE - Each thin flexible plastic sheet acts as heat moldable plastic sheets that hardens, making it perfect for any thermoform, shrink, or vacuform project. Duco's ABS bendable plastic sheet is malleable in other ways through molding or forming via vacuum or shrink techniques
DUAL-SIDED - The 3mm thick ABS plastic sheet black has two sides with one hosting a thin haircell pattern and the alternative side hosting a smooth material pane. A great choice when looking for plastic raw materials
MULTI-PURPOSE - With Duco's ABS styrene plastic sheet, the possibilities are endless! Use these for projects inside or outside on a car dashboard or dash install, different types of repair, thermoplastic wall, heat resistant projects, fit a car audio frame, and many other DIY crafts. Duco is the place for all of your formable plastic, acetal Delrin rod, corrugated plastic sheet, and closure strip essentials

From the brand

D.I.Y Materials Galore!

Visit the Store
Shop More D.I.Y Materials!

Visit the Store

Steve

Great as a dash panel

Reviewed in the United States on June 2, 2024

I used this to create a dash instrument panel for a golf cart. It cut easily with a table saw and jigsaw.
It was glossy on one side, and textured on the other. It was perfect for this purpose.

Kindle Customer

I can't complain

Reviewed in the United States on June 3, 2024

These sheets are very sturdy but yet are easy to file or trim down when needed to. They cut really good with a band saw. Do not try to use alot of heat to make cuts because it will fuse back to itself. If you can...just use a band saw, stroll saw, fine tooth blade in a jig saw, a fine tooth blade in a table saw, a small hand saw with fine tooth, or if you just need to break off a piece. Just use a straight edge with a utility knife with a new blade to scar it. Just make sure you scar it deep enough and then just break it off. It breaks pretty clean too.

Chad C Baudoin

A Marvelous Marvel of Modern Plastic Engineering!

Reviewed in the United States on October 3, 2023

I recently had the pleasure of experiencing a remarkable piece of plastic that has truly exceeded my expectations in every way. This plastic marvel has demonstrated its versatility, durability, and environmental friendliness, making it a standout product in today's world. While it may seem like a simple piece of plastic, this piece of plastic has proven to be an invaluable addition to my daily life. Here's why I'm singing its praises:

DUrability: One of the standout features of this piece of plastic is its durability. This piece of plastic has held up remarkably well in a variety of situations, from being exposed to extreme temperatures to enduring the wear and tear of everyday use. I've used this piece of plastic in outdoor settings, where it has withstood rain, sun, and even snow without showing any signs of wear or damage. This durability ensures that it will last for a long time, making it a cost-effective investment.

Versatility: This piece of plastics versatility has been an absolute game-changer for me. I've found countless uses for it around my home and in various DIY projects. Whether I need to create a makeshift seal, protect surfaces from damage, or simply organize my belongings, this piece of plastic has proven to be a reliable solution. Its flexibility and adaptability have made it an essential tool in my household.

Environmentally Friendly: The eco-conscious side of me also appreciates that this piece of plastic is recyclable, which aligns with my efforts to reduce waste and minimize my environmental footprint.

Ease of Maintenance: Cleaning and maintaining this plastic marvel is a breeze. It requires minimal effort to keep it looking pristine, saving me valuable time and energy.

In conclusion, this piece of plastic has truly won me over with its outstanding performance, durability, versatility, and commitment to environmental responsibility. It's a testament to the incredible advancements in plastic engineering, proving that plastics can be a force for good in today's world. I couldn't be happier with my purchase of this piece of plastic.

A. Rybka

This plastic works!

Reviewed in the United States on May 24, 2024

Great looking plastic, easy to cut and make holes. Great for vehicle door panels!

Walt B.

Thick and sturdy, heat to bend & shape

Reviewed in the United States on March 26, 2024

I used this to make combo fender flares/mudflaps for an ATV. Stuff was thicker than I expected, but that's on me. I cut it with a grinder, then used a heat gun to shape & fit. Sturdy but flexible, reasonably easy to work with, and they look great.

Consumer reporter

I/8 inch thick and not sure how or what to use to cut to shape necessary.

Reviewed in the United States on September 24, 2023

Heavy duty as I bought the 1/8 inch size, shiny on one side and grainy texture on the other. I intend to cut a piece to fit a "cut-out" of the splash shield to get at the oil drain plug and oil filter on Japanese vehicles rather than remove 20 plus clips that take forever to remove just to change the oil. Done it twice , which is why I bought this item. The black plastic of "Splash Shields" can be rather long and difficult to remove and difficult to replace, not only that "SOME" of the clips are slightly LONGER than the majority of clips. So that has to be noted and keep longer clips SEPARATE. The reason some are longer is that they also hold thicker splash shields toward the font of engines or near the front tires. It is obvious when you come clips and then separate the longer ones that go through TWO splash shields. I can see uses for the grainy side to cut -out (which is not an espionage term) which is for mounting a switch or two or three underneath the dash panel for interior lighting, power to a CB Radio, Power to an auxilary horn switch or to hold a momentary contact switch for an auxiliary Horn that would be much louder than the pip-sqeak horn from the factory. Any momentary contact will be held by the 1/8 inch ABS BLACK PLASTIC, which is the same type of ABS plastic that DWplastic plumbing pipe. So its unlikely to crack. Recommend 1/8 inch at it will of course be less flexible but should last forever in a car or truck. For a rough edge it will need to be sanded by wet-or-dry black sanding paper, only on the edge for a finished look. One could also add outlets for C- or Micro USB, or Lighting cables for charging phones or other devises. a good product that takes a little work. It can also be bent by use of a heat gun but assistance is needed to shape it into a right angle or less than a right angle or even an obtuse angle depending upon where you intend to attach it to your under dashboard area. 1/8 inch will be easily drilled and easily fastened to by whatever switch, guage , or outlet you choose to drill out the ABS to hold. A series of small diameter drilled holes can be made if you do not have a circle cutter, and as long as the item you are attaching has a cover it will not show up any jagged edge.

Bill Lettau

A Good Deal During Bidenomics

Reviewed in the United States on June 4, 2024

Easy to work with. Not brittle

Chris m.

Nice

Reviewed in the United States on May 4, 2024

I uses this to make a housing for a radio. It's nice and thick, worked as needed.

Best Sellers in

Tynulox 5Pcs 304 Stainless Steel Round Rod, 1/4" Diameter 12" Length Metal Solid Shaft Rods for Industry, Metal Working Hobbi

4.5 396

17.99

AMZDEPOT 6 Pack 12x8 Inch Wire Mesh, 20 Mesh 304 Stainless Steel Mesh, Never Rust Sturdy Metal Mesh Screen for DIY Projects,

4.6 411

7.99

KTOJOY 25PCS Dowel Rods Wood Sticks Wooden Dowel Rods - 1/4 x 12 Inch Precut Dowels for Crafting, Hardwood Dowel Rod Assortme

4.7 302

4.99

ADTDA 2 Pieces 1/8" Thick (3mm) Acrylic Sheets,Clear Cast Plexiglass 8” x 12” with Protective Paper for Signs DIY Display Pro

4.6 402

9.99

1 PC 11”X14” (28cmX36cm) Wire Mesh 5 Mesh, Sturdy Metal Mesh Sheets for DIY Projects 304 Stainless Steel No Rust Mesh Screen

4.5 1685

3.99

CALPALMY (2-Pack) 12 x 12 Inch Clear Acrylic Sheet Plexiglass 1/4" Thick; Use for Craft Projects, Signs, Display Cases, DIY P

4.4 1514

14.99

Therwen 100ft Copper Wire for Gardening, Electroculture, Bonsai, Jewelry Making Beading DIY Craft Pure Bare Copper Wire Spool

4.5 368

9.99

99.9% Copper Dowsing Rods - 2PCS Divining Rods - for Ghost Hunting Tools, Divining Water, Treasure, Buried Items Etc

4.5 2374

13.99