I bought my new iPhone 13 Max Pro about six months ago and, after researching many screen and lens protectors, chose to go with this one. An iPhone, as you know, is an incredibly expensive investment and it really needs to be protected so it can last a long time.
When I received this kit, it came with three sets of each of the protectors, which is GREAT! I drive a box truck full time and it’s a bumpy, hard ride. There are times when my phone takes a bit of a beating during the day. Anything I can do to minimize damage to my phone is important.
The camera lens protectors are very intuitive to install. Just make sure you clean the lenses prior to sticking in the protector. There are three, as I mentioned, so you have backup for a later date if you need to swap them out. Very cool!
The screen protector was a bit tricky for me, only because I hadn’t had previous experience with them. They are hard and I have only had soft protectors in the past. So thank goodness there were three of them because, due to my ignorance, I had trouble installing the first two and threw them away thinking I only had one shot to get them in place (like with a soft protector). This was my mistake. If you place it off-center, you can simply slip your fingernail under the edge, lift it up and reset it. Lol Don’t throw it away, like I did.
Use the included alcohol prep pad and wipe to clean your screen before putting on the protector. You want all of the dust and fingerprints off the screen because, once the protector is on, you can’t go back and clean it. Once cleaned, take one of the protectors out of the sleeve. There’s a green tab you can use to pull the film off the back. Make sure you don’t touch where the film was. This side goes against the screen. Pull the film off and use your fingertips to hold the edges. I recommend having the phone in front of you length-wise (sideways) and using two hands to center the protector on top of the screen. Be mindful that there is a small groove cut out on one end that aligns with the top of your screen. Align one edge with your phone and slowly lower the protector so it is even on the edges. The directions say to press in the middle but I found that it will start connecting with the screen on different places. If a bubble forms, simply lift the edge close to the bubble slightly to let the air out and press it down again. It’s easy to do this because it’s a hard protector. Just use small corrections, you don’t have to raise the protector up much, just a tiny bit to let the air out.
I got the screen protector on and everything worked perfectly! It wasn’t as noticeable as I thought it would be. It also had NO effect on the touchscreen functions. It’s a great protector kit and works!!!
After six months of daily use in a box truck, I began noticing small cracks and was worried that the cracks had gone through to my phone screen. I ordered another kit (because remember, being an idiot the first round, I had thrown out two of the protectors for no reason). I just peeled off my screen protector and I was AMAZED that, although the protector was cracked in many places, my phone screen was in PERFECT condition! Not even a little scratch or small dent. Nothing. Just like new. I took a picture and added it to show you the first protector and my phone screen. I just put my second protector on and it was easy to install! I learned after my first round last year. :)
So please buy this if you care about your phone. It’s amazingly scratch resistant, the kit is awesome and generous with multiple back up protectors … and it works!
QHOHQ for iPhone 16 Pro Screen Protector with Camera Lens Protector, [Military Grade Shatterproof], Top 9H+ Tempered Glass, F
4.5 | 146,050 ratings
Price: 9.96
Last update: 10-03-2024
About this item
Military-grade Shatter-resistant Protection: QHOHQ's screen protector designed for iPhone 16 Pro has undergone rigorous exam including 200-pound impacts, 10-foot drops, 10,000 scratches, and 99% light transmission, has been certified to meet international military standards. Reinforced multiple times at 800°C, it has 9H+ hardness, effectively preventing shattered edges, scratches, and breakage. Even if dropped from a height of 10 feet, your phone will remain unscathed
1:1 Full-Screen Coverage Design: Screen protector tempered glass adopting specially designed 1:1 3D curved black edge coverage, it perfectly wraps around every curve of the screen, fits perfectly with the phone screen and ensures no gaps around the edges, effectively preventing dust and dirt from entering, providing full protection for the screen and making it smoother to the touch
Ultra-thin & High-definition Experience: Crafted with 0.33 mm ultra-thin tempered glass, it offers superfast app launching, maintaining the same response speed and touch experience as a bare phone while preserving original ultra-high-definition image quality. The surface is treated with a plasma oil-resistant coating, effectively preventing fingerprints caused by sweat and oil stains, enhancing screen visibility, and keeping the screen as clean and fresh as new
Easy Installation: The QHOHQ-designed glass screen protector for iPhone 16 Pro comes with a simple Installation Tool that automatically aligns with your phone's screen, leaving no bubbles or imperfections. Enjoy your screen just as if there were no protector on it; Please watch our installation video tutorial before installation
AR Technology and Night Shooting Function: The specially designed for the iPhone 16 Pro camera lens protector incorporates the latest AR-enhanced "seamless" fusion technology, which enhances light transmittance and improves the quality of photos and videos. The camera cover upgrades the "Night Shot Circle" feature to maintain the original quality of photos and videos even when the flash is turned on at night
1:1 Full-Screen Coverage Design: Screen protector tempered glass adopting specially designed 1:1 3D curved black edge coverage, it perfectly wraps around every curve of the screen, fits perfectly with the phone screen and ensures no gaps around the edges, effectively preventing dust and dirt from entering, providing full protection for the screen and making it smoother to the touch
Ultra-thin & High-definition Experience: Crafted with 0.33 mm ultra-thin tempered glass, it offers superfast app launching, maintaining the same response speed and touch experience as a bare phone while preserving original ultra-high-definition image quality. The surface is treated with a plasma oil-resistant coating, effectively preventing fingerprints caused by sweat and oil stains, enhancing screen visibility, and keeping the screen as clean and fresh as new
Easy Installation: The QHOHQ-designed glass screen protector for iPhone 16 Pro comes with a simple Installation Tool that automatically aligns with your phone's screen, leaving no bubbles or imperfections. Enjoy your screen just as if there were no protector on it; Please watch our installation video tutorial before installation
AR Technology and Night Shooting Function: The specially designed for the iPhone 16 Pro camera lens protector incorporates the latest AR-enhanced "seamless" fusion technology, which enhances light transmittance and improves the quality of photos and videos. The camera cover upgrades the "Night Shot Circle" feature to maintain the original quality of photos and videos even when the flash is turned on at night
Product information
Warranty & Support
Product Warranty: For warranty information about this product, please click here
Feedback
Would you like to
tell us about a lower price?
QHOHQ for iPhone 16 Pro Screen Protector with Camera Lens Protector, [Military Grade Shatterproof], Top 9H+ Tempered Glass, Full Edge Coverage, Ultra Durable, with Easy Installation Tool [3+3 Pack]
Share: https://www.amazon.com/dp/B0D8B4S9TK
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.
Where did you see a lower price?
Top reviews from the United States
Saffee
Takes a Beating so Your Phone Won’t
Reviewed in the United States on April 23, 2022
Saffee
Reviewed in the United States on April 23, 2022
When I received this kit, it came with three sets of each of the protectors, which is GREAT! I drive a box truck full time and it’s a bumpy, hard ride. There are times when my phone takes a bit of a beating during the day. Anything I can do to minimize damage to my phone is important.
The camera lens protectors are very intuitive to install. Just make sure you clean the lenses prior to sticking in the protector. There are three, as I mentioned, so you have backup for a later date if you need to swap them out. Very cool!
The screen protector was a bit tricky for me, only because I hadn’t had previous experience with them. They are hard and I have only had soft protectors in the past. So thank goodness there were three of them because, due to my ignorance, I had trouble installing the first two and threw them away thinking I only had one shot to get them in place (like with a soft protector). This was my mistake. If you place it off-center, you can simply slip your fingernail under the edge, lift it up and reset it. Lol Don’t throw it away, like I did.
Use the included alcohol prep pad and wipe to clean your screen before putting on the protector. You want all of the dust and fingerprints off the screen because, once the protector is on, you can’t go back and clean it. Once cleaned, take one of the protectors out of the sleeve. There’s a green tab you can use to pull the film off the back. Make sure you don’t touch where the film was. This side goes against the screen. Pull the film off and use your fingertips to hold the edges. I recommend having the phone in front of you length-wise (sideways) and using two hands to center the protector on top of the screen. Be mindful that there is a small groove cut out on one end that aligns with the top of your screen. Align one edge with your phone and slowly lower the protector so it is even on the edges. The directions say to press in the middle but I found that it will start connecting with the screen on different places. If a bubble forms, simply lift the edge close to the bubble slightly to let the air out and press it down again. It’s easy to do this because it’s a hard protector. Just use small corrections, you don’t have to raise the protector up much, just a tiny bit to let the air out.
I got the screen protector on and everything worked perfectly! It wasn’t as noticeable as I thought it would be. It also had NO effect on the touchscreen functions. It’s a great protector kit and works!!!
After six months of daily use in a box truck, I began noticing small cracks and was worried that the cracks had gone through to my phone screen. I ordered another kit (because remember, being an idiot the first round, I had thrown out two of the protectors for no reason). I just peeled off my screen protector and I was AMAZED that, although the protector was cracked in many places, my phone screen was in PERFECT condition! Not even a little scratch or small dent. Nothing. Just like new. I took a picture and added it to show you the first protector and my phone screen. I just put my second protector on and it was easy to install! I learned after my first round last year. :)
So please buy this if you care about your phone. It’s amazingly scratch resistant, the kit is awesome and generous with multiple back up protectors … and it works!
Images in this review
Meyu
A Bubble-Free, Protective Dream
Reviewed in the United States on July 10, 2024Empriva
I'm impressed!
Reviewed in the United States on September 11, 2024Amma
So happy with the quality that this is my 2nd purchase
Reviewed in the United States on June 22, 2024negrita505
Easy to apply, good value
Reviewed in the United States on September 23, 2024Su Doki
Great quality with extras
Reviewed in the United States on July 24, 2024
Su Doki
Reviewed in the United States on July 24, 2024
Images in this review
