MAXKOSKO 6 Ft. 120 V Heat Tape for Water Pipes, Self-Regulating Heating Cable for Metal And Plastic Pipes

PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This pipe heater can keep water flowing at ambient temperatures down to -40 °F (-40 °C). It consists of an additional 3 Ft power cord Plus a heating cable varies from 2 Ft to 160 Ft long. Such as 6 Ft, refers to the length of the heating cable itself. The power cord length is additional and not included in this measurement
HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: Heat Tape for Water Pipes smartly adjust its power output and never overheat or Burn. Heat tape for Pipes can be installed with Straight-traced, Spiraled, or Overlapped
ENERGY SAVING: Self-regulating heat cable has a built-in thermostat that automatically turns on at 38 °F, heat trace cable heats only when necessary. Pipe wrap tape has a 3 ft power cord which means that the distance between the thermostat and the plug is 3 feet
EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 4-steps instruction.(If you want to test before installation, please test at a temperature under 0 °C (32 °F).Plug in the heating cable. Normally you can feel the slight warmth on the cable in a few minutes.)
FOR BOTH PLASTIC AND METAL PIPES: The heat trace for pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2 in diameter. Pipe heating cable is not perishable and will not expire