2 Pack UCFL202-10 Pillow Block Bearing - Flange Mounted Pillow Block Bearings - Bearing Steel Bearings with 5/8" Bore - Self

4.5 4.5 out of 5 stars | 69 ratings

Price: 14.59

Last update: 12-19-2024


About this item

HIGH PERFORMANCE - UCFL202-10 pillow bearing has low friction, low noise, uniform speed, reduced impact on equipment, and good load performance
LOWERS MAINTANENCE COSTS - The installed pillow bearing avoids repeated disassembly and repair of the bearing, reduces replacement frequency and maintenance costs
DOUBLE SEALING - The pillow bearing adopts a double layer seal, which has good sealing performance and does not allow impurities and water to enter, extending its service life
HIGH QUALITY - The pillow block bearing is made of bearing steel, which is more solid and durable, with high density, durability and long service life
WIDELY USED - Suitable for various mechanical fields such as textiles, motors, CNC machine tools, aerospace, industry, agriculture, metallurgy, chemical engineering, etc

Product information

User guide
Materials & Care

Feedback

Would you like to tell us about a lower price?

2 Pack UCFL202-10 Pillow Block Bearing - Flange Mounted Pillow Block Bearings - Bearing Steel Bearings with 5/8" Bore - Self Alignment

Share: https://www.amazon.com/dp/B0CMXHVPP8

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?

Fields with an asterisk are required
Item details
Measurements

Top reviews from the United States

  • Xopher H
    5.0 out of 5 stars these are great BUT
    Reviewed in the United States on October 2, 2024
    I recommend ordering several extras because this poor sellers inventory situation is a mess. I had to return several of these before I finally got the right size/correct part number.
  • Sky1
    5.0 out of 5 stars Well made
    Reviewed in the United States on December 4, 2024
    Fit is good and heavy built. I like the fact it has a grease zerk
  • Scott Hargrove
    4.0 out of 5 stars good but odd sized grease fittings
    Reviewed in the United States on September 15, 2024
    I used these on the idler shaft on my old Delta 12" lathe. I had to cut off the two tabs to mount the bearings in the lathe's bearing holders, but that was quick and easy. I'll have to look for a grease gun tip that fits the half-sized fittings, though.
  • chuck finney
    5.0 out of 5 stars Nice and thick material
    Reviewed in the United States on December 12, 2024
    I used them on dump trailer roll covers
  • Zygmunt Wawrzyniak
    5.0 out of 5 stars Very good product
    Reviewed in the United States on August 18, 2024
    Exactly as advertised
  • robert
    5.0 out of 5 stars Really TIRED of PLASTIC....
    Reviewed in the United States on June 19, 2024
    Flimsy light weight bushings...SO upgraded my tractors steering, you know like wheel bearings, thrust bearings etc. etc.. However never got around to the big one, the steering collum...that's a main problem with pretty much all garden tractors. Critical parts are CHEAP, CHEAP, CHEAP made out of plastic. And there not cheap in cost, So I order this ball bearing to replace the cheesy plastic bushing one. I got TWO of them at a price of one crap plastic one...WHAT a diff it makes. like power steering time. If you want better steering. Like, man go for these they're a great value and super-fast delivery. Thanks Amazon and the seller!!!
    Customer image
    robert
    5.0 out of 5 stars Really TIRED of PLASTIC....
    Reviewed in the United States on June 19, 2024
    Flimsy light weight bushings...SO upgraded my tractors steering, you know like wheel bearings, thrust bearings etc. etc.. However never got around to the big one, the steering collum...that's a main problem with pretty much all garden tractors. Critical parts are CHEAP, CHEAP, CHEAP made out of plastic. And there not cheap in cost, So I order this ball bearing to replace the cheesy plastic bushing one. I got TWO of them at a price of one crap plastic one...WHAT a diff it makes. like power steering time. If you want better steering. Like, man go for these they're a great value and super-fast delivery. Thanks Amazon and the seller!!!
    Images in this review
    Customer image
  • Natural*Engineer
    1.0 out of 5 stars Center to center mounting hole dimensions WRONG!
    Reviewed in the United States on October 23, 2024
    I machined my base plate for these bearings based upon the listed dimension. It was WRONG! Caused me to rework. Unacceptable. Hopefully the bearings perform. PS.. I’m a retired mechanical engineer.
  • GCC
    5.0 out of 5 stars Needs to have the mounting holes size listed.
    Reviewed in the United States on May 13, 2024
    I purchased these as better alternative to the junky end plate / bearing assemblies for my garage door whan I had to replace the torsion springs. There are plenty of replacement bearings listed for these end plates, but some end plates are impossible to remove the old bearing without a press and the correct intallation bushing; your only choice being to purchase new end plates with the same crappy bearings installed. The old plate assemblies were fastened with 5/16 bolts. The mounting I.D. on the block is a little over 5/8 but I was able to find nylon bushings to solve that issue. The self aligning is a huge plus as are the set screws to secure the bearing to the cross shaft.
    My garage door is happy and quieter now.
    Customer image
    GCC
    5.0 out of 5 stars Needs to have the mounting holes size listed.
    Reviewed in the United States on May 13, 2024
    I purchased these as better alternative to the junky end plate / bearing assemblies for my garage door whan I had to replace the torsion springs. There are plenty of replacement bearings listed for these end plates, but some end plates are impossible to remove the old bearing without a press and the correct intallation bushing; your only choice being to purchase new end plates with the same crappy bearings installed. The old plate assemblies were fastened with 5/16 bolts. The mounting I.D. on the block is a little over 5/8 but I was able to find nylon bushings to solve that issue. The self aligning is a huge plus as are the set screws to secure the bearing to the cross shaft.
    My garage door is happy and quieter now.
    Images in this review
    Customer image

    • Best Sellers in

     
     

    2Pcs 8mm x 300mm (0.315 x 11.81 inches) Vigorous Linear Motion Rods, Case Hardened Chrome Shaft Linear Rail Guide Shaft for 3

    4.6 4.6 out of 5 stars 85
    8.99
     
     

    Jeremywell #35 Roller Chain 3 Feet (95 Links) + 1 Master Link for Go Karts, Mini Bikes, Motorcycles, Dirt Bike and Industrial

    4.4 4.4 out of 5 stars 3749
    9.75
     
     

    uxcell 6700ZZ Deep Groove Ball Bearings Z2 10mm x 15mm x 4mm Double Shielded Chrome Steel 10pcs

    4.5 4.5 out of 5 stars 149
    7.59
     
     

    Jeremywell 40 Roller Chain 10 Feet with 2 Connecting Links for Go Karts, Mini Bikes, Scooters, ATV, MTV, Dirt Bike and Other

    4.6 4.6 out of 5 stars 1349
    21.45
     
     

    Jeremywell #35 Roller Chain 10 Feet (319 Links) + 2 Master Links for Go Karts, Mini Bikes, Motorcycles, Dirt Bike and Industr

    4.4 4.4 out of 5 stars 3749
    18.08
     
     

    Goodyear Belts 3L470 FHP Belts, Top Width: 0.38", Effective Length: 47"

    4.7 4.7 out of 5 stars 80
    8.58
     
     

    Jeremywell #35 Roller Chain 5 Feet + 2 Master and 1 Offset Links for Go Karts, Mini Bikes, Motorcycles, Dirt Bike and Industr

    4.4 4.4 out of 5 stars 3749
    13.67
     
     

    BESTORQ A47 or 4L490 V-Belt, Classic Wrapped Rubber X3 V-Belt, Black, 49" Outside Circumference x .51" Width x .34" Height, P

    4.5 4.5 out of 5 stars 843
    15.21