Timberland sizing is always a mystery to me. Depends on the type of boots you buy from them, sizing are all over the map. For regular timberland classic boots I had to go down 1 full size to get a good fit without my heel slipping and excessive room in the toe box. That's what I was planning to go with before I bought this steel toe boot, thank god I read the reviews on them.
1. Sizing: For this boot, you really want to go to your normal true size. Now, everyone has a different opinion on what their true size is, the way I determined mine was that there is no heel slippage, and I have enough room in the toe box that my toes are not right up against the end of toe box. For most Nike/Adidas/Jordans, I am a size 10, and they typically fit me just as I described above. For this pair of timberland, I went with a size 10 with normal width. The fit was good, but not perfect. Due to the steel toe, the toe box are narrower, and shorter then typical Timberland, and since it's a work boot, the insole seems to be thicker and provide better support than regular Timberlands (i'm comparing it to Timberland classic 6 inch boot). All that translate to a smaller fit when compare to a Timberland classic 6 inch boot. So when I went true to size, it felt good. Only complain is that the heel of the boot is wider so I do have some heel slippage, but this was easily remedied by thicker socks or socks with heel padding.
2. comfort: I bought this mainly to work in a laboratory condition where there are heavy machinery, so I don't walk in them all day long. However, I did notice that the support was excellent and my feet ain't tired at end of the day despite the fact that this pair of boots is HEAVY!
3. lacing: I like to provide some comment on lacing. It's hard to to tie this pair of boot up "snug." What I do I mean by snug? Well, typically when I lace up a boot, I like to make sure I felt a little bit of pressure from lacing it up from the top of my foot up to where I tie a knot. However, because of the steel toe and it being a very stiff boot, I can hardly feel any pressure on top of my foot when I lace it up. But since my foot isn't moving around in the boot, I was ok with it. You can lace the top of the boot tight once you get past your ankle though, the top of the boots does have more give to them where you can lace it up tight if needed.
4. Overall: Great boot, on the heavy side, but provided great support. Durability review will come later.
Timberland PRO mens Pit Boss 6 Inch Steel Safety Toe Industrial Work Boot
4.4
| 30,148 ratingsPrice: 96.67
Last update: 12-21-2024
Product information
Feedback
Would you like to
tell us about a lower price?
Timberland PRO mens Pit Boss 6 Inch Steel Safety Toe Industrial Work Boot
Share: https://www.amazon.com/dp/B0CVNNRRDW
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.