I knew my old hose was not going to last much longer so I started looking around for a replacement. Too expensive in the local big box stores so I started searching online. Then I discovered there are two popular sizes for the fittings, 14mm and 15mm. I went back to the instructions for my Craftsman gas pressure cleaner and determined I need the 14mm size, and I already knew I needed one that would be rated for 3000psi pressure.
Unlike some competing products, the description for this particular hose was complete enough for me to see it would be the correct size and was rated for the pressure I needed. And the price was much better than I had seen locally. The reviews on some of the other ones online were not too good; they talked about the hose not lasting for more than one or two cleaning cycles! But the reviews for this one were quite good.
And now, I am pleased to add my own positive experience. The hose arrived well within the estimated arrival timeframe. I didn't use it right away, as I intended it as a spare. However two days later, my old hose burst! So it is a lucky thing I ordered this one when I did; all I had to do was disconnect the old hose and replace it with this new one. The fittings were perfect for my pressure washer on both ends. It works great!
I like the finish of the outside of the hose as well. The old one had a very "flat" finish, and constant rubbing on the concrete (sidewalk, driveway) being cleaned is what wore the hose down and caused it to be weak in several places, one of which being where it burst. This new hose has a "glossier" finish, which seems to glide across the concrete more easily. Perhaps that finish will wear off and it will become more like the old hose, but for now, it appears to be holding up well.
I am pleased to recommend this product!
YAMATIC Pressure Washer Hose 25FT 1/4" Kink Resistant M22 Brass Fitting Power Washer Hose Replacement for Ryobi, Troy Bilt, G
4.5 | 11,352 ratings
Price: 24.99
Last update: 01-03-2025
About this item
[Pressure Washer Replacement Hose] Higher Quality 25ft Replacement Hose for Max 3200 PSI gas power pressure washer and high pressure electric washers, compatible with Honda, Greeworks, Ryobi, Troy Bilt, Powerstroke, Craftsman, Husqvarna, Uberflex, etc. Please Note: Need adapter to fit some electric pressure washers like Sun Joe, Please email us for support to get the right one or the adapter.
[Kink-Resistant 1/4" Power Washer Hose] New developed material to prevent kink when you wash for extra distance requirement, easy management, and roll-up. TIPS: Please lay flat to full length before using it, then it will be moved and store very easily.
[Better Durability] With innovative high technology material and process management, newly upgraded strength, and wear resistance. YAMATIC high-pressure washer extension hose provides a longer life for your home and commercial use to wash Cars, Driveways, etc. Tech Tip: Don't touch the gas power engine muffler because only afford 140℉/60℃, the high temperature will burn the hose in a short time.
[Durable Brass Connector] American Standard M22-14mm Thread is made from SOLID BRASS, much thicker and heavier, can be firmly connected with your high pressure washers and parts, won't shake or be damaged easily, and has no leaking. DOUBLE DURABLE!
[Value Service] Please feel free to message us if you have any item or technical problems with this pressure hose, we provide 7X24 hours of customer service. Welcome to check other pressure washer accessories at YAMATIC Power Center Store.
[Kink-Resistant 1/4" Power Washer Hose] New developed material to prevent kink when you wash for extra distance requirement, easy management, and roll-up. TIPS: Please lay flat to full length before using it, then it will be moved and store very easily.
[Better Durability] With innovative high technology material and process management, newly upgraded strength, and wear resistance. YAMATIC high-pressure washer extension hose provides a longer life for your home and commercial use to wash Cars, Driveways, etc. Tech Tip: Don't touch the gas power engine muffler because only afford 140℉/60℃, the high temperature will burn the hose in a short time.
[Durable Brass Connector] American Standard M22-14mm Thread is made from SOLID BRASS, much thicker and heavier, can be firmly connected with your high pressure washers and parts, won't shake or be damaged easily, and has no leaking. DOUBLE DURABLE!
[Value Service] Please feel free to message us if you have any item or technical problems with this pressure hose, we provide 7X24 hours of customer service. Welcome to check other pressure washer accessories at YAMATIC Power Center Store.
Product information
| Brand | YAMATIC |
|---|---|
| Material | Polymer, Brass |
| Color | Black |
| Product Dimensions | 300"L x 0.25"W |
| Item Weight | 2.4 Pounds |
| Maximum Pressure | 3200 Pound per Square Inch |
| Nominal Wall Thickness | 1.5 mm |
| Outside Diameter | 0.25 Inches |
| Item Length | 300 Inches |
| UPC | 687551600349 |
| Manufacturer | YAMATIC |
| Item Weight | 2.4 pounds |
| ASIN | B07DQWPZN1 |
| Item model number | PD-34647 |
| Customer Reviews |
4.5 4.5 out of 5 stars
(11,315)
4.5 out of 5 stars |
| Best Sellers Rank | #2,567 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden) #3 in Pressure Washer Hoses |
| Is Discontinued By Manufacturer | No |
Top reviews from the United States
RickExcellent product at an excellent price!
tasstexasSturdy
Steve ClemBetter than original
Amazon CustomerGreat value, but will rust
Amazon Customer
Reviewed in the United States on May 15, 2024
Be sure to keep the hose away from hot engine parts as it will melt and fail. The hose will also wear out when frequently dragged across rough surfaces like concrete and landscape stones. Also be sure to disconnect the hose every use because it does rust inside. I use my power washer so frequently year, that I left the hose connected for for weeks at a time. When my hose sprung a leak, I had to replace the water gun because it would not unscrew even whit pipe renches because it was so rusted. The pictures of the new hose I bought six weeks ago it’s already showing rust (see photo).
This hose will last for years as long as you only use it once or twice a month . Just be sure to disconnect it after each use. It’s not a bad purchase for heavy users, but just expect to replace it once every 12 to 18 months.
Images in this review
Amazon CustomerSo far so good
GeorgeGreat replacement
Josh Great replacement part
Joseph W Hall