BELTTT 2000W Pure Sine Wave Inverter, Car Power Inverter 12V to 120V AC Converter for RV, Truck, Solar, Outdoor with Dual AC
4.4 | 914 ratings
Price: 152.99
Last update: 01-19-2026
About this item
- 【POWERFUL DC to AC CONVERTER】: This car power inverter delivers 2000W of continuous DC 12V to AC 110V 120V power and up to 4000W of peak surge power when the load is started. The car inverter has a conversion efficiency of greater than 91% during normal working and low no-load losses
- 【PURE SINE WAVE INVERTER】: The power inverter output waveform is consistent with the AC waveform of the utility grid and is suitable for inductive and capacitive loads. It extends the service life of the equipment and reduces the fault rate. Can be used with electrical equipment such as televisions, home theaters, car stereos and other sensitive loads for a long time
- 【INTELLIGENT LCD DISPLAY】: This 2000Watt inverter comes with a high-brightness real-time smart screen that simultaneously displays input and output voltages, battery and load status, multiple operating conditions for timely troubleshooting. At the same time, the output voltage and screen can be adjusted independently in a small range
- 【POWER YOUR EXPECTATIONS】: The inverter 12V to 110V features dual AC socket, 20A Outlet, 5V2.1A USB port, Hardwire Port and remote controller with 23Ft Cable. This solar inverter is ideal when you need energy for off-grid, outdoors, RV, trucks
- 【MULTIPLE SAFETY PROTECTIONS】: Pure sine wave inverter provides undervoltage, overvoltage protection, overload, over temperature protection, short circuit and reverse connection protection. Aluminum and sturdy plastic housing ensures long term use
Product information
Features & Specs
| Power Source | Solar and Battery Powered |
|---|---|
| Wattage | 2000.0 |
| Voltage | 12 Volts |
| Number of Outlets | 3 |
| Input Voltage | 12 Volts |
| Output Power | 2000 Watts |
| Standby Power Shutoff | 91% |
| Output Voltage | 120 Volts |
| Frequency | 60 Hz |
| Display Type | Graphical LCD |
| Peak Output Power Watts | 4000 |
| Inverter Capacity Volt-Amp | 2000 |
| Electrical Output Waveform | Pure Sine Wave |
Measurements
| Item Dimensions L x W x H | 14.8"L x 7.7"W x 3.9"H |
|---|---|
| Item Weight | 7.7 Pounds |
Warranty & Support
Amazon.com Return Policy:Amazon.com Voluntary 30-Day Return Guarantee:You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditionshere.
Product Warranty:For warranty information about this product, pleaseclick here
Feedback
BELTTT 2000W Pure Sine Wave Inverter, Car Power Inverter 12V to 120V AC Converter for RV, Truck, Solar, Outdoor with Dual AC and 20A Socket, 5V 2.1A USB, Surge 4000W, Hardwire Port, Remote Controller
Share:https://www.amazon.com/dp/B0DCJPTVMW
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.
Where did you see a lower price?
Fields with an asterisk*are required
Pleasesign into provide feedback.
Item details
| Brand | BELTTT |
|---|---|
| Antenna Location | Outdoor, Camping, Home, RV, Truck, Off-grid Solar Power |
| Model Name | BAP2000A |
| Built-In Media | 2000 Watt Pure Sine Wave Inverter, 2x 2AWG 3Ft Battery Cables, 6x 45A fuses, Remote Controller with 23Ft Cable, Thimble Spanner and Manual |
| Model Number | BAP2000A |
| Global Trade Identification Number | 06973452090223 |
| Customer Reviews | 4.44.4 out of 5 stars(907) 4.4 out of 5 stars |
| Best Sellers Rank |
|
| ASIN | B0DCJPTVMW |
| Item Height | 3.9 inches |
| Manufacturer | POOJIN ELECTRONIC |
| Warranty Description | One Year Warranty |
User guide
| Energy Specifications Met | UL, ETL |
|---|
Top reviews from the United States
- Randem PhelpsSo far, this inverter really shines!Exceptionally well-built, without the number one cause of failure related to design flaw - using bolted wiring lugs. This one has proper soldered metal tabs that are securely soldered directly to the circuit board for the battery wires, which prevents high resistance in the battery input from developing as the lugs heat up and cool down, expanding and contacting until the internal connections where the wires bolt on the back of the lugs come loose and add massive amounts of resistance. This is what caused the fire that resulted inside my last inverter (you can find my review of that one with photos of the internal wiring that melted and caught fire in my other reviews here).
The way the tabs on this inverter are soldered directly to the board instead of using knurled twist connectors like many others do relieves my fear of another fire.
The battery cables bolt on with actual bolts to the exposed side of the tabs, and have hard plastic shells that prevent short circuits in the battery cables where they go into the converter housing. This is MUCH safer than the lugs with wires bolted on the inside that then connect to the circuit board.
The display that comes on the face of this unit, and the one on the remote switch are clear, easy to read, and not so bright that they'll keep you awake at night. They also have useful information for quick-glance occasional checking of the battery voltage, AC output voltage and a bar graph for current load. They also show either "OK" when the system is functioning normally, and fault codes for errors such as over voltage, overload, and other possible faults. Intuitively, the face of both readouts has fault code explanations right on the panel so you'll never have to go looking through drawers trying to find the owner's manual to know what went wrong if you get an error, and can use the information immediately to correct the fault. This speaks very highly of the design.
Installation was very easy, and due to the type of transformers this inverter uses, it's just over half the weight of many comparable inverters. One of the best things about this inverter is that when the red push-button switch on the face of the inverter (and the remote switch if connected) are in the "off" position, there is NO current draw, so you don't get the typical arcing that occurs with many of the inverters in this price range, and don't have to use a resistor when connecting your battery to prevent huge sparks. This is a huge safety bonus for lead acid battery setups as that spark could lead to an explosion if your battery is off-gassing when you make that connection.
So far, I'm quite impressed. I tested the system using a 300ah lithium iron phosphate battery to power the inverter, and running a 10,000btu home air conditioner plugged directly into one of the inverter sockets. The inverter didn't even stumble, powering the air conditioner for over an hour. The fans turned on immediately when the load was applied, rather than waiting for the inverter to heat up, which again is safer than units which turn the fans on in response to heat after it occurs. This kept the heat on the outside of the inverter down to only 24f above ambient temperature. The fans are also about as noisy as an electric toothbrush, (and far less irritating).
As for longevity, only time will tell. But we're off to a great start so far, and for the reasons already mentioned, I already feel confident that this inverter was designed to perform well, and to last.
If anything changes, I'll change my review to reflect the changes. If you're reading this review and it's still showing 5 stars with no updates, it's still performing as stated. - Gerald J.Well Built InverterI bought this inverter to use in my camper, and I'm glad I bought it, although now I'm wishing I had bought their 3000-Watt model so I could power more appliances like the coffee pot or vacuum cleaner. I will most likely buy that one and use this one in my truck in the near future. That said, It's an extremely well-built inverter for under $100.
As it is, this inverter is great for smaller appliances and electronics. I've run my KOIOS air purifier with it, my laptop and TV with no issues. I've got it hooked up to a general lead-acid battery at the moment which is kept charged with two 100-watt solar panels, and it’s working fine. I had a partly-sunny day yesterday, and I used the inverter for several hours without depleting my battery.
I really like the ease of installation and the high quality and workmanship that went into this inverter. The LED display is really nice, so you can see at a glance your DC input, power output, error codes and battery level. The power connection in the back is great, not those stupid knobs that other inverters have. These are bolts with nuts and washers that do a MUCH safer and more reliable job. I also like the included grounding block mounted on the side.
To wrap up, the BELTTT brand is impressive. Well built, easy to install, functions well, is SUPER quiet, is mountable so it travels fine, and makes a great addition to my camper to use during power outages or just to help offset the electricity that I use with shore power hooked up to my camper. I wish I had gone ahead and bought the 3000-Watt model, but that’s on me. I recommend this product. - Tonian FullertonAwesome unitThis inverter works well... Very nice and durable unit.. its quiet and it handles load very well . Definitely value for my money and I would recommend it to anyone..
- T YamamotoGood inverter, with a few minor issuesTrue to prior reviews, this appears to be a well built and capable inverter that comes with everything you need. Hooked it up the day I got it and it's been powering a 5 cu ft chest freezer continuously, and other devices as needed without any issues for 48hrs now. Couple of minor things that potential buyers should be aware of, and the reason for 4 instead of 5 stars: 1 of the 2 plastic acorn nuts that secure the terminal protector caps wasn't fully threaded, so it can't engage the terminal lug unless you discard one of the 2 supplied flat washers. There was also no reading on the output meter on either the inverter screen or wired remote with my 60 watt test load, so I thought I had a defective unit. Saw a YT vid where the reviewer had the same issue, which is there will be no display on the output meter with "low" wattage loads. When I ran a load of 600 watts, the output meter did show 2 bars. Too bad they went with a bar, rather than a numerical output display. Overall, this inverter has done what I need it to so far- delivering continuous clean and stable a/c power without any issues.
- DanielSuperb QualityThis inverter is a GREAT buy. Works seamlessly and haven’t had any issues with it. I read some other reviews that stated it could be noisy due to the fans when there’s a load, but I don’t think that’s the case. Using it with my battery back-up setup and it works flawlessly.
- Tim StanleyBELTTT inverters worth taking a look at if you’re looking for qualityBELTTT 2000 watt inverter I purchased works great,I use it for backup on my pellet stove along with a 100Ah Lithium battery . Delivers steady power has a battery indicator power output indicator plus the cooling fans kick on only under heavy load I would recommend this inverter to anyone looking for a quality product!!
- J.H.Great product!So far I love this inverter. I run it 24hrs a day and have been for many months. I use this as part of my solar power system. So yes very durable. Fan is not to loud for me but I do have it located in a separate room with all my solar controllers etc. The inverter came with nice heavy duty cords. This inverter has no problem running the air conditioner 24hrs a day even. Great product in my opinion.
- Andrew ShawBeltt 1500W InverterGood product. Need sufficient battery power but no issues with inverter