CMFG AK15-5/8 Bored-to-Size V Belt Sheaves 1.55''OD, 5/8 Inch Bore,Cast Iron, AK Pulley Single Groove for"4L" or"A" Belt

4.7 | 266 ratings

Price: 8.99

Last update: 06-18-2024

About this item

Pulley outside diameter is 1.55 inch, 1 Groove
Inner diameter:5/8", Bore type:Fixed Bore
Cast iron for resistance to wear and galling
Standard V-belt Sheave Use with A, 3L & 4L (A & AX) V-Belts
Enjoy a smooth&worry-free return service within a month

Top reviews from the United States

Robert

Perfect!!

Reviewed in the United States on March 23, 2024

This pulley worked great for my new engine on my snowblower. is high quality and very hefty. true to size unlike some others I've used in the past. the Allen bolts hold tight and really lock down the pulley tight, 10/10

Bill R

high quality

Reviewed in the United States on March 19, 2024

good deal works great

Zina Deretsky

Very concentric!

Reviewed in the United States on April 16, 2023

I bought two different sizes of these iron pulleys (and a linked drive belt) to replace crappy, fragile zinc pulleys on a belt sander.

The belt sander was very noisy just running with no load. Upon inspection, both pulleys were bent and not very concentric, which created a lot of vibrations.

With the new pulleys and drive belt, my belt sander is MUCH quieter and much more pleasant to operate. Not to mention that these pulleys aren't going to bend! They're stout. I like that.

Mr.Rita

works great

Reviewed in the United States on April 25, 2024

great product

Dave

Perfect fit

Reviewed in the United States on June 14, 2024

Fit was exact, no issues with keyway size etc. Bought for Honda GX120 and GX 160 engines.

Debbiez

Great fit for my saw.

Reviewed in the United States on September 22, 2022

Easy to install.

Joe Gill

FINALY found the right one

Reviewed in the United States on May 15, 2024

this is perfect

Christian C. Kunig

Super Nice!!

Reviewed in the United States on November 16, 2021

Very nicely machined! It fit on the 5/8th's shaft of a 2 hp motor perfectly! The motor shaft was a little rusty and the key was a little rusty, so it slid on about halfway and then I had to tap it with a piece of 2X2 wood a few times while holding the key in place to get it the rest of the way on. It couldn't possibIy have fit any better! I supposed I could have just lightly sanded the motor shaft, but where's the fun in that?!? It's going to drive a quite wicked old school air compressor. Whatever breaks, I know for a fact, it won't be this pulley!

Best Sellers in

Goodyear 5LK900 Lawn and Garden Aramid V-Belt 5/8 x 90 in

4.6 43

37.68

RHKING #40 Roller Chain Sprocket B Type 5/8" Bore Rust Prevention Hardened 9 Tooth

4.3 145

14.99

Goodyear 4LK1000 Lawn and Garden Aramid V-Belt 1/2 x 100 in

4.4 42

26.89

BESTORQ A65 or 4L670 V-Belt, Classic Wrapped Rubber X3 V-Belt, Black, 67" Outside Circumference x .51" Width x .34" Height, P

4.5 816

23.75

2020 V Aluminum Extrusion, 4PCS 400mm European Standard Anodized Extruded Aluminum Profile Extrusion Linear Rail for 3D Print

4.7 245

17.59

Goodyear Belts 3L345 FHP Belts, Top Width: 0.38", Effective Length: 34.5"

4.7 87

7.78

Coastal Shaft Collars - 1.50" Bore Diameter - Clamping Two Piece Shaft Collar - 303 Stainless Steel (1 Pack)

4.4 235

16.35

BESTORQ B51 or 5L540 Rubber V-Belt, Wrapped, Black, 54" Length x 0.66" Width x 0.44" Height

4.3 250

14.04