IKTCH Upgrated 36"Island Mount Range Hood, 900 CFM Ducted Range Hood with 4 Speed Fan, Stainless Steel Range Hood 36 inch wit

4.2 4.2 out of 5 stars | 321 ratings

Price: 538.52

Last update: 09-10-2024


About this item

【Gesture-sensing Control, Keys Without Stains】IKTCH island mount range hood is composed of 1MM thick stainless steel panel. Pure stainless steel color makes the appearance more elegant. The gesture sensing function and remote control are newly added to the original touch switch panel.Even if your hands are stained with oil,don't worry about dirtying the it.
【900 CFM Powerful Suction, 0 Residue of Fumes】900 CFM super suction range hood 36 inch is equipped with 1 motors and balanced fans to instantly absorb fumes and cooking smells in all directions. Even if there is an aftertaste, IKTCH's custom-made 1-15 minute adjustable timer will automatically clean up for you,keeping the kitchen environment fresh and natural.
【Bright Kitchen Nightlight, Wide Vision for Cooking】Equipped with 2PCS 3W energy-saving LED lights, the brightness can be adjusted with touch to meet your cooking needs. This island mount range hood 36 inch'lights are bright and soft without hurting the eyes,and instantly improves the visibility at night.
【Quiet Working, Telephone Call While Cooking】With a shock-absorbing and stabilizing ring, 4-speed settings customize your kitchen stove vents to adjust suction and noise levels. The noise level of range hood is set at a minimum of 40dB and a maximum of only 65dB, allowing you to stay away from the noise and immerse yourself in cooking.
【Permanent Filter Plate, Separation of Grease & Smoke】IKTCH IKIS02-36 includes 3 matching stainless steel permanent range hood filters which can effectively separates and captures cooking grease and oil.It is easy to remove and only need to put it in the dishwasher then you will get a brand new filter.

Product information

Technical Details


Top reviews from the United States

Benck
5.0 out of 5 stars Beautiful hood!
Reviewed in the United States on January 13, 2022
I needed a hood to suck grill smoke out of my outdoor kitchen area. It is under a flat roof section against a window into kitchen. So very important to NOT have a lot of smoke as the wind will push it into any opening on this side of house. Everything I read said to get a 1200+ cfm fan, but I found none with such a nice low profile as this one, although it is 900 cfm. It does an adequate job of removing most smoke, but not all of it as is probably to be expected. To further reduce effectiveness, It would have blocked our views if set the recommended 33" above grill surface, so we are quite a bit higher.

The fan is truly quiet and no issues with gesture controls or using remote. The lighting is more than adequate. My biggest challenge was having to mount closer to the roof than the included square duct covers would allow. I had to cut metal brackets and shrouds down with a metal cutoff saw, which turned out being much easier than it sounds. So if you are at all handy or have a handy person assisting, do NOT let this factor stop you from buying. It can be done!

I feel this is ideally suited for over a standard range, but also works okay for over a grill. Problem is when grill lid is closed, the smoke comes out the back well behind the vents and when grill lid is open, the smoke comes out well in front of the vents. I added Plexiglas to divert the smoke from back up into vents that I remove after cooking. (not shown). I am working on a more permanent solution for basically expanding the hood wider and lower with plexiglass to not block window AND capture more smoke.

Bottom line is I would buy this again. It is beautiful and well made and great stainless steel. It gets 65% of the smoke out of the area and my wife loves it. The latter being very important! Oh, and the price was right too.
Customer image
Benck
5.0 out of 5 stars Beautiful hood!
Reviewed in the United States on January 13, 2022
I needed a hood to suck grill smoke out of my outdoor kitchen area. It is under a flat roof section against a window into kitchen. So very important to NOT have a lot of smoke as the wind will push it into any opening on this side of house. Everything I read said to get a 1200+ cfm fan, but I found none with such a nice low profile as this one, although it is 900 cfm. It does an adequate job of removing most smoke, but not all of it as is probably to be expected. To further reduce effectiveness, It would have blocked our views if set the recommended 33" above grill surface, so we are quite a bit higher.

The fan is truly quiet and no issues with gesture controls or using remote. The lighting is more than adequate. My biggest challenge was having to mount closer to the roof than the included square duct covers would allow. I had to cut metal brackets and shrouds down with a metal cutoff saw, which turned out being much easier than it sounds. So if you are at all handy or have a handy person assisting, do NOT let this factor stop you from buying. It can be done!

I feel this is ideally suited for over a standard range, but also works okay for over a grill. Problem is when grill lid is closed, the smoke comes out the back well behind the vents and when grill lid is open, the smoke comes out well in front of the vents. I added Plexiglas to divert the smoke from back up into vents that I remove after cooking. (not shown). I am working on a more permanent solution for basically expanding the hood wider and lower with plexiglass to not block window AND capture more smoke.

Bottom line is I would buy this again. It is beautiful and well made and great stainless steel. It gets 65% of the smoke out of the area and my wife loves it. The latter being very important! Oh, and the price was right too.
Images in this review
Customer image Customer image
Deon Frank
5.0 out of 5 stars 8' ceiling is a problem
Reviewed in the United States on May 8, 2024
As others have noted, installing this hood under an 8' ceiling is a problem. I opted to use just one of the duct covers. First I drilled holes through the top plate and the supporting 2x4s in the attic to take 4 long bolts. Then I attached the flexible duct to the fan assembly. I attached the top plate to the "angle irons" and then to the fan & hood assembly on the counter top. I then slid the duct cover over from the top. Using the cardboard box it came in and bits of lumber I elevated the hood until the top plate was in position snug on the ceiling. Now the hard part: I crawled into the attic and working through the duct hole, jiggled the top plate around until I could slide the bolts from the bottom through the top plate and 2x4s, and then I installed washers and nuts. Tightening the nuts cinched the assembly nice and firmly to the ceiling.

I think I could have come up with a better design to make installation a lot less challenging. For one, everything is assembled with frustrating tiny little nuts and bolts. Bring your good glasses!

5/17/2024 update: I was contacted by Iktch and they generously resolved the issues I had to my satisfaction. Now that the hood is installed we are very pleased with the looks, performance, and the quality of the product. Updated 3 stars to 5 stars.
Customer image
Deon Frank
5.0 out of 5 stars 8' ceiling is a problem
Reviewed in the United States on May 8, 2024
As others have noted, installing this hood under an 8' ceiling is a problem. I opted to use just one of the duct covers. First I drilled holes through the top plate and the supporting 2x4s in the attic to take 4 long bolts. Then I attached the flexible duct to the fan assembly. I attached the top plate to the "angle irons" and then to the fan & hood assembly on the counter top. I then slid the duct cover over from the top. Using the cardboard box it came in and bits of lumber I elevated the hood until the top plate was in position snug on the ceiling. Now the hard part: I crawled into the attic and working through the duct hole, jiggled the top plate around until I could slide the bolts from the bottom through the top plate and 2x4s, and then I installed washers and nuts. Tightening the nuts cinched the assembly nice and firmly to the ceiling.

I think I could have come up with a better design to make installation a lot less challenging. For one, everything is assembled with frustrating tiny little nuts and bolts. Bring your good glasses!

5/17/2024 update: I was contacted by Iktch and they generously resolved the issues I had to my satisfaction. Now that the hood is installed we are very pleased with the looks, performance, and the quality of the product. Updated 3 stars to 5 stars.
Images in this review
Customer image Customer image
Connie Hecker
4.0 out of 5 stars Refund given
Reviewed in the United States on January 17, 2024
Update: I loved this hood. It was very powerful. I wish it was an easier situation for me to reinstall the replacement unit that was offered. I opted for a refund. I would not discourage you from purchasing this hood as long as you are able to do your own install and not have to pay someone. If yours will work flawlessly, this is a great hood.

Update: After writing this review, I was contacted by the seller. IKitch provided a new circuit board. It cost me $75 to have my installer replace the old board with the new one. Unfortunately, the unit still does not work and I have now asked for a refund. It worked so well- (when it would work) and it is so pretty. But I will now have to find a different unit and spend more installation money to remove and hang a different unit.
Originally: While this is a beautiful and functional hood, something has gone wrong and I have received NO product support even though I have written. The instructions were followed by the professional installer. However sometimes this product will not turn on. The next day it will and will work a few days and then not again. All systems check out fine. I have yet to receive any response from the seller. I am very disappointed. I don't know if it is a defect in the wiring from the manufacturer or what. I would like a replacement or a solution - yesterday!

Best Sellers in

 
 

Powerful Portable Range Hood 2800 Rpm Airflow, Portable Kitchen Exhaust Fan for Cooking, Strong Ventilation, Frying Pan & Ste

5 5 out of 5 stars 6
75.99
 
 

COSMO COS-QB75 Under Cabinet 30 in. Range Hood with Push Button Controls, Permanent Filters, LED Lights, Convertible from Duc

4.4 4.4 out of 5 stars 2940
289.67
 
 

ONEEON 24" Range Hood Insert, 500CFM Stainless Steel Built-in Kitchen Vent, 4-Speed Exhaust Fan, Dishwasher-Safe Baffle Filte

4.4 4.4 out of 5 stars 15
179
 
 

IKTCH 36"Wall Mount Range Hood, 900 CFM Ducted Range Hood with 4 Speed Fan, Durable Stainless Steel Range Hood 36 inch with G

4.3 4.3 out of 5 stars 500
476.04
 
 

FIREGAS Black Under Cabinet Range Hood 36 inch 200CFM with Ducted/Ductless Convertible, Slim Kitchen Stove Vent Hood with 3 S

4.6 4.6 out of 5 stars 16
119.99
 
 

ZLINE 36" Convertible Vent Wall Mount Range Hood in Stainless Steel (KB-36)

4.4 4.4 out of 5 stars 821
449.96
 
 

Under Cabinet Range Hood 30 inch, 600 CFM Kitchen Vent Hood with 4-Speed Exhaust Fan, Stainless Steel Hood with Gesture/Touch

4 4 out of 5 stars 35
169.99
 
 

Midea MVU30W2AST Range 30 Inch Under Cabinet Vent Ductless Convertible with Durable Stainless Steel, Kitchen Hood with 2 Reus

4.2 4.2 out of 5 stars 133
79.99