We got this set of LED under-car lights for our son for his first car. I helped him install them and it was very straightforward. There are a lot of videos out there that show installation of this kind of light kit, and most of them are pretty bad. If you want it to look good, take your time and find places to route the wires so they don't dangle down under the vehicle or risk getting tangled in moving parts of the car. We routed a lot of the wiring from under the car through the body panels, behind the wheel well liners, and up into the engine bay to keep everything clean. Be sure to have lots of extra zip ties on hand for wire management.
Even with lots of pre-cleaning to the mounting surfaces, the adhesive on the backs of the light strips wasn't strong enough to permanently adhere the lights to the underside of the vehicle. The adhesive was good enough to keep them in place so we could secure them with the provided brackets, but the mounting screws needed pre-drilling in almost every location. That made installation take a lot longer, but I'm a lot more confident the light strips will stay in place.
As for the lights themselves, they're super bright! They're somewhat visible during the day, but really pop at night. Even with the receiver module mounted under the hood at the firewall, the remote functions just fine from inside the vehicle. Because we mounded the receiver in the engine bay, the music-syncing function only works while the engine is off. Otherwise, the sound and vibration of the engine is too strong and drowns out any music that might be picked up by the module. With the engine off, the music from the stereo really puts on a show!
Nilight - TR-05 2PCS 60 Inch 180 LEDs Bed Strip Kit with Waterproof on/Off Switch Blade Fuse 2-Way Splitter Extension Cable f
4.4 | 7,193 ratings
Price: 22.67
Last update: 12-23-2024
About this item
Impressive brightness: The 2PCS light strip includes 180 PCS 5050-SMD LED chips, outputs a 2400LLM 6000K super bright white light to light up your entire truck bed.
Quick installation: Peel and stick, the self-adhesive tape with tough-as nail adhesive enhancer offers a 5X strength for strong sticking. You can also add on the included mounting hardware for extra security.
Easy and safe your electrical hookup: Come with 2-way splitter, inline blade fuses, on/off switch and extension cable for all your wiring needs, and always ensure the circuit safety in driving.
Flexible & durable design: The light strip is in IP67 sealed housing, well protect strip against raindrop, dirt and sand, super durable and flexible with up to 30, 000 hours lifespan
Wide application: Can be widely used for RV Awning light, truck bed light, step bar led light, side door light etc.
It has IP67 sealed housing that can well protect LED strips against raindrops, and snow and is super durable and flexible.
Quick installation: Peel and stick, the self-adhesive tape with tough-as nail adhesive enhancer offers a 5X strength for strong sticking. You can also add on the included mounting hardware for extra security.
Easy and safe your electrical hookup: Come with 2-way splitter, inline blade fuses, on/off switch and extension cable for all your wiring needs, and always ensure the circuit safety in driving.
Flexible & durable design: The light strip is in IP67 sealed housing, well protect strip against raindrop, dirt and sand, super durable and flexible with up to 30, 000 hours lifespan
Wide application: Can be widely used for RV Awning light, truck bed light, step bar led light, side door light etc.
It has IP67 sealed housing that can well protect LED strips against raindrops, and snow and is super durable and flexible.
Product information
Warranty & Support
Amazon.com Return Policy:Amazon.com Voluntary 30-Day Return Guarantee: You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditions here.
Manufacturer’s warranty can be requested from customer service. Click here to make a request to customer service.
Feedback
Would you like to
tell us about a lower price?
Nilight - TR-05 2PCS 60 Inch 180 LEDs Bed Strip Kit with Waterproof on/Off Switch Blade Fuse 2-Way Splitter Extension Cable for Cargo, Pickup Truck, SUV, RV, Boat , 2 Years Warranty
Share: https://www.amazon.com/dp/B07KXR799K
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.
Where did you see a lower price?
Top reviews from the United States
JoewhazouMy son loves them!
Joewhazou
Reviewed in the United States on September 5, 2024
Even with lots of pre-cleaning to the mounting surfaces, the adhesive on the backs of the light strips wasn't strong enough to permanently adhere the lights to the underside of the vehicle. The adhesive was good enough to keep them in place so we could secure them with the provided brackets, but the mounting screws needed pre-drilling in almost every location. That made installation take a lot longer, but I'm a lot more confident the light strips will stay in place.
As for the lights themselves, they're super bright! They're somewhat visible during the day, but really pop at night. Even with the receiver module mounted under the hood at the firewall, the remote functions just fine from inside the vehicle. Because we mounded the receiver in the engine bay, the music-syncing function only works while the engine is off. Otherwise, the sound and vibration of the engine is too strong and drowns out any music that might be picked up by the module. With the engine off, the music from the stereo really puts on a show!
Images in this review
hmschoolmomJust what I wanted
Tyler DavisUse caution with screws
Tyler Davis
Reviewed in the United States on October 13, 2024
Images in this review
CaseyBright White
Casey
Reviewed in the United States on May 3, 2023
Pros:
These lights are plenty bright to light up the bed of a truck. No need for a front or rear strip. Just the side strips are plenty. The adhesive they come with seems to be plenty strong. Was doubtful they would stick to the carpet but they seem to be doing fine. Time will tell. Wiring process is pretty straight forward. There’s plenty of extra cable attached to the lights themselves to reach wherever you place the splitter. Seem to be pretty durable. Lights are encased and seem weather resistant. They come with mounting tabs which could be useful if the adhesive isn’t enough. Can’t use when installing on shell tho as it would screw through roof.
Cons/Heads Ups:
The supplied butt connectors are cheap. If you are using an extension I would purchase heat shrink weather resistant butt splices. The extension wire they supply you with isn’t very long. Maybe 6 feet. For my application I had to run power from the battery so a much much longer extension was needed. The negative is plenty long to reach a ground. They also do not supply any ring splices to connect to battery terminal. The power switch does not have any holes for mounting screws or adhesive attached.
Overall these are great lights and are well worth the money. The cons listed aren’t really cons as much as they are a heads up to those wanting to install yourself. I’m a heavy equipment tech so I had everything I needed readily available. Just buy an assorted splice kit, ~50ft~ of wire, electrical tape, and maybe some loom if you’re OCD lol. But I would say any novice DIY’er can do it!
Images in this review
RichI can see
Rich
Reviewed in the United States on September 4, 2024
Images in this review
