GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

4.8 4.8 out of 5 stars | 2,615 ratings

Price: 47.24

Last update: 07-20-2024


About this item

Gearwrench's Sensor and Sending Socket Set is designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches
Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units
Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units
Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units
Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit

Product information

Technical Details


Top reviews from the United States

M3Woody
5.0 out of 5 stars Great Value for the Money!
Reviewed in the United States on June 9, 2024
With the variety of Sensor Sockets in this kit your vehicle it should cover many of the Sensor fitments you will run into on vehicles today. Makes short work of removing and installing a faulty sensor. much easier than trying to use a wrench that is not intended for a sensor with a wire attached.
It fits the sensor so there is no worry of rounding off the flats and making a nightmare out of what can be a quick and easy job!
Amazon Customer
5.0 out of 5 stars great tool
Reviewed in the United States on July 4, 2024
used twice so far no problems neither time i think they will last a long time
Barret
5.0 out of 5 stars Great set
Reviewed in the United States on March 9, 2024
I have only used the 22mm O2 sensor sockets from the set so far, but they work great. Doing an O2 sensor (especially on a northern car) without these is pretty miserable. This feels like a super high quality set and I didn't notice any flexing on any of the sockets with the opening on the side, despite some O2 sensors requiring a 1/2 impact gun to even get starting to move. I am also a fan of the included clamshell case
Jasmin
5.0 out of 5 stars Better then tool brands trucks
Reviewed in the United States on May 17, 2024
I highly recommend this
My co worker but a cornwell set
And I bought these
Compared them and tested them on a seized up inlet nox and gear wrench did not slip in fact took it right out like no tommorow
Compared to the cornwell set which slipped it and round it out a bit even tho it damaged it but gear wrench still over took it and I am amazed by the price for the quality and strength they have well worth trusting it for the price
Rick In STL
4.0 out of 5 stars Its a good kit for 02 sensors but in my 2 time experience it's had me worried but it worked out
Reviewed in the United States on December 26, 2019
I have a 05 cadillac and tahoe. When I got the kit I had a caddy showing an 02 error, I got under the car and tried to remove. I was trying to break it free and could not as the sockets were opening up and causing me to strip the sensor bolt base. I did not have a torch at that time and just was worried I was about to make the issue more problematic.

Now for our Tahoe, I got the upstream passenger side sensor, got a MAP torch setup to heat it up. I was able to get the sockets into the area, and tried to break it free. This sensor was original and I figured I'd need a torch. I was able to get the socket to turn about 1/2 turn but then it would lock up. Lots of PB Blaster and heat.... still wasn't giving me more range. Then I was able to force it a little more getting tired of this zone I couldn't move it. Probably was about 1 hr of that back and forth effort and it popped free but the threads on the sensor were gone. Buy yourself a thread chaser if you are looking at this.

The sensor replacement says 35ftlbs so I can't say for sure it's the socket is opening up once you are putting some serious pressure on the socket. It may be just expect to use a torch and expect the sensor to strip out as you remove. I was able to get it out, the sensor edges of the base were rounded a fair amount which scared me considerably. Bottom line it has worked out. I guess after 2 sensor attempts I've got a better feel of what to expect and the time it takes to get these out.

I hope this helps others trying to tackle this sort of job
Jose
5.0 out of 5 stars Engraved sizes on them
Reviewed in the United States on May 29, 2024
Does what is intended to
Wolffe
5.0 out of 5 stars Nice thickness, no sharp or rough edges, lifetime warranty.
Reviewed in the United States on August 9, 2020
Before purchasing I saw some reviews complaining that the set was made from CR-V. Why? These aren't impact rated sockets. CR-V is actually a harder and more expensive than CR-Mo and is the ideal material for non-impact sockets like these. The largest of the sockets is CR-Mo and would likely hold up to impact use, but again, these aren't impact rated sockets. Please at least have a basic understanding of what you're buying before complaining.

These are solid. While these are one of those items that the average home user is going to use infrequently, you never know when you'll need them. I compared the GM oil pressure sending socket to a comparable one from Lisle and the quality was MUCH better. The Lisle socket is functional, but has rough and sharp edges inside. The Gearwrench socket is very well made and was actually cheaper when you factor in price-per-socket. The lifetime warranty helps give peace of mind.

I'm overall very happy with these. If I have a longevity issue I'll update my review.
James G.
5.0 out of 5 stars Great Kit, and great price
Reviewed in the United States on April 11, 2022
Purchased these incase I need them at work, well 5 months later I finally did. Had to replace an oil pressure sensor and need these sockets to make the job easier.
The socket worked like a charm and Made the replacement painless.
Used one of the O2 sensor sockets about a week later to replace a catalytic converter and it worked great.
Highly recommend this kit

Best Sellers in

 
 

TEKTON 3/8 Inch Drive Micrometer Torque Wrench (10-80 ft.-lb.) | 24330

4.6 4.6 out of 5 stars 27726
50
 
 

O'Berry Enterprises 3233 Squeek No More Kit

4.2 4.2 out of 5 stars 3939
22.43
 
 

GEARWRENCH 20 Pc. Ratcheting Combination Wrench SAE/Metric - 35720A-02

4.7 4.7 out of 5 stars 2953
66.54
 
 

IRWIN QUICK-GRIP Clamps for Woodworking, Quick Release Triggers, 6 Inch, 8 Piece Set (IRHT83220)

4.7 4.7 out of 5 stars 6358
24.99
 
 

DEWALT 20V MAX Jig Saw, Tool Only (DCS331B)

4.8 4.8 out of 5 stars 7381
140.67
 
 

DEWALT 20V MAX 7-1/4-Inch Cordless Circular Saw with Brake, Bare Tool Only (DCS570B)

4.7 4.7 out of 5 stars 4941
189.98
 
 

PULITUO 12V Yellow Cordless Drill Set Power Drill Kit with Battery and Charger,electric drill home improvement,3/8-Inch Keyle

4.5 4.5 out of 5 stars 397
29.99
 
 

DURATECH 4 Way Sillcock Key Set, Utilities Key, Multi-functional Water Key, 2-Pack, for Valve, Faucet, and Spigots

4.7 4.7 out of 5 stars 3801
9.9