Coastal Shaft Collars - 1.00" Bore Diameter - Clamping Two Piece Shaft Collar - 303 Stainless Steel (1 Pack)

4.4 4.4 out of 5 stars | 257 ratings

Price: 12.18

Last update: 12-08-2024


About this item

These two-piece stainless steel split shaft collars have an inside diameter of 1.00 inches, an outside diameter of 1.75 inches and a thickness of 0.5 inches. This pack includes 1 split collar and its corresponding screws.
Made in the USA by Coastal Machine Works. We strive to deliver high quality and precise collars. Every collar has its edges and holes deburred and its corresponding inside diameter bore engraved on its front face for easy identification.
Made from 303 stainless steel, these shaft collars have excellent corrosion resistance and are ideal for wet environments or when corrosive chemicals are present.
The two-piece design makes installation simple. The split collar can be disassembled and reassembled anywhere along the shaft without needing to remove other components or having access to the ends of the shaft.
Strong, even clamping pressure around the shaft is created using the two included 1/4-28 x 5/8” stainless steel socket head screws. Compared to set screw style collars, the two-piece design has significantly higher clamping force and will not mar the shaft/pipe.

From the brand

Previous page
Next page

Top reviews from the United States

Doug
5.0 out of 5 stars Excellent Construction, Excellent Finish, Holds Tight
Reviewed in the United States on August 11, 2024
I used this as a counterweight stop for my telescope counterweights. The weights are around 50 lbs and need to be held tightly in place on a delicate instrument. When they arrived the finish was clean and bright, with no rough edges, and no excess gum or oil. The bolts fit smoothly and tightly, and the collar held the weights tightly in place with no motion. I also tried a competitor, but the fit and finish on these were the best. After seeing both side-by-side, I purchased several more of these.
Customer image
Doug
5.0 out of 5 stars Excellent Construction, Excellent Finish, Holds Tight
Reviewed in the United States on August 11, 2024
I used this as a counterweight stop for my telescope counterweights. The weights are around 50 lbs and need to be held tightly in place on a delicate instrument. When they arrived the finish was clean and bright, with no rough edges, and no excess gum or oil. The bolts fit smoothly and tightly, and the collar held the weights tightly in place with no motion. I also tried a competitor, but the fit and finish on these were the best. After seeing both side-by-side, I purchased several more of these.
Images in this review
Customer image
Triple Bogie
5.0 out of 5 stars The stainless steel quality used for the stop collar is excellent but costly.
Reviewed in the United States on June 14, 2024
I am using this as a bowling ball drill bit stopper collar ring for Jo Po thumb inserts. I am using the 1” inside diameter stainless steel stop ring collar with a Jayhawk brand 1 1/2” bowling ball drill bit. The top part of the 1 1/2” drill bit is 1”. This 1” stop collar ring fits perfectly and uses a 6 point hex 3/16” bit to tighten or loosen the bolt. If you only have a hex set in mm units, you will not be able to tighten the bolts. I just so happens to have the 3/16” bit in a set that came with both mm and inch format multiple bits. The quality of the stainless steel is excellent. The screw in bolts work as should and make sure to screw in both evenly as this stop ring is made to leave a gap after fully tighten on. 1 inch diameter bit. I would suggest that the company leave a choice to the Amazon customer to choose between mm and inch format for the bolts. i feel this is the best out there in USA made quality. I used a digital caliper to measure 3.22” to the stop of the stop ring before tightening down the bolts. This is Jo Po recommended drilling depth for their outer sleeve ring. Make sure the drill press is precisely set at zero / zero using the thumb slug contoured cutting bit to calibrate the settings. Value for the money is on the higher side but at a few bucks more, I just bit the bullet so I didn’t have to worry about which ones to get. I rate this stainless steel 1” stop collar ring at 5 STARS and will update again later of needed.
Steven Morano
5.0 out of 5 stars Ridiculously nice collar
Reviewed in the United States on August 17, 2024
This is an absolute piece of jewelry. Beautiful machining, high quality materials, made in the USA- what's not to like? They are also similarly priced to non-American made alternatives. I used them in place of push nuts to hold new wheels onto my pressure washer. One review mentions that the collar isn't round when fully closed- this is intentional, as if it was, it wouldn't grab the shaft. If you need a shaft collar for anything, these are an obscenely good value. Buy with confidence.
Chris
5.0 out of 5 stars Well Made
Reviewed in the United States on September 11, 2024
I was worried about buying these over some specifically made sway bar locks, but they worked amazingly for much less, they are very clearly well made. But, I’m not sure what grade stainless they are, as they are on a daily drive race car, I will update if they rust at all.
Customer image
Chris
5.0 out of 5 stars Well Made
Reviewed in the United States on September 11, 2024
I was worried about buying these over some specifically made sway bar locks, but they worked amazingly for much less, they are very clearly well made. But, I’m not sure what grade stainless they are, as they are on a daily drive race car, I will update if they rust at all.
Images in this review
Customer image Customer image
Adi Dassler
5.0 out of 5 stars Great product
Reviewed in the United States on August 7, 2024
Well made and perfect fit.
JeepingBrad
4.0 out of 5 stars Very nice and good quality but not quite "round"
Reviewed in the United States on October 4, 2023
Very nice and good quality but they are not exactly round when fully clamped together, as I needed (see pics). A bit of an oval shape but they do work and am satisfied with the quality.
Customer image
JeepingBrad
4.0 out of 5 stars Very nice and good quality but not quite "round"
Reviewed in the United States on October 4, 2023
Very nice and good quality but they are not exactly round when fully clamped together, as I needed (see pics). A bit of an oval shape but they do work and am satisfied with the quality.
Images in this review
Customer image Customer image
Alter Ego
3.0 out of 5 stars Smaller than Described, Had to Return as a Result!
Reviewed in the United States on May 2, 2023
I have an older donut shaped weight that was no longer available, in 33mm ID and 39mm ID of similar pricing. The 33 fit perfect but the 39 was too big. I sometimes use the 33 to hold the 39 on which gives a nice weight but I was looking for something closer in size to the 33mm weight. I decided on the 1-3/8" bore as that would be ever so slightly larger. My donut shaped weight was 15mm thick, so two additional at 12mm would fit nicely with 3 weights.

I want to start this off in saying that the actual product is nice quality, seems to be polished but does have a slight metallic smell but since it isn't 316L Surgical Stainless that is to be expected. The edges were de-burred but having a square shape leads to sharp corners, especially when trying to install it. My other weight has a fixed pin with a simple allen wrench head that's a different size.

I measured the ID of my current weight and it was 33.1mm which is 1.303 decimal inch. This purchased collar has an oval rather than round bore. The last time I checked a bore is a circle. Using my digital micrometer I measured my current ring and it was perfectly round at 33.1mm. The 1-3/8" bore(1.375mm decimal inch) measured as follows(pictured):
top to bottom with bolts horizontal to surface: 1.18 decimal inch or 30mm
left to right with bolts horizontal to surface: 1.33 decimal inch or 33.8mm

Ordering these in 1.375 or 1-3/8 bore, one would expect them to be a larger ID than 33mm which would be 1.29921 decimal inch. However being oval or flattened slightly makes the overall ID smaller as well as the fact that the widest point was 1.143mm smaller than the described bore size of 1.375 decimal inches which is 34.925mm.

Here are those measurements all together for sizing from smallest to largest:
1.180in = 30.0mm (This item Top to Bottom)
1.303in = 33.1mm (My previously purchased donut ring at 33mm ID)
1.330in = 33.8mm (This item Left to Right)
1.375in = 34.925mm (This items size as Described)
1.143mm (This item was this much smaller than indicated just over 1/16th of an inch nearly 3/32)

For my purpose, I needed it to be exact and I had to return for this reason, I am deducting 2 ⭐'because the product was not as described but the overall quality was decent. If using for intended purpose, skin will impress and 1/16th likely won't matter much.
Customer image
Alter Ego
3.0 out of 5 stars Smaller than Described, Had to Return as a Result!
Reviewed in the United States on May 2, 2023
I have an older donut shaped weight that was no longer available, in 33mm ID and 39mm ID of similar pricing. The 33 fit perfect but the 39 was too big. I sometimes use the 33 to hold the 39 on which gives a nice weight but I was looking for something closer in size to the 33mm weight. I decided on the 1-3/8" bore as that would be ever so slightly larger. My donut shaped weight was 15mm thick, so two additional at 12mm would fit nicely with 3 weights.

I want to start this off in saying that the actual product is nice quality, seems to be polished but does have a slight metallic smell but since it isn't 316L Surgical Stainless that is to be expected. The edges were de-burred but having a square shape leads to sharp corners, especially when trying to install it. My other weight has a fixed pin with a simple allen wrench head that's a different size.

I measured the ID of my current weight and it was 33.1mm which is 1.303 decimal inch. This purchased collar has an oval rather than round bore. The last time I checked a bore is a circle. Using my digital micrometer I measured my current ring and it was perfectly round at 33.1mm. The 1-3/8" bore(1.375mm decimal inch) measured as follows(pictured):
top to bottom with bolts horizontal to surface: 1.18 decimal inch or 30mm
left to right with bolts horizontal to surface: 1.33 decimal inch or 33.8mm

Ordering these in 1.375 or 1-3/8 bore, one would expect them to be a larger ID than 33mm which would be 1.29921 decimal inch. However being oval or flattened slightly makes the overall ID smaller as well as the fact that the widest point was 1.143mm smaller than the described bore size of 1.375 decimal inches which is 34.925mm.

Here are those measurements all together for sizing from smallest to largest:
1.180in = 30.0mm (This item Top to Bottom)
1.303in = 33.1mm (My previously purchased donut ring at 33mm ID)
1.330in = 33.8mm (This item Left to Right)
1.375in = 34.925mm (This items size as Described)
1.143mm (This item was this much smaller than indicated just over 1/16th of an inch nearly 3/32)

For my purpose, I needed it to be exact and I had to return for this reason, I am deducting 2 ⭐'because the product was not as described but the overall quality was decent. If using for intended purpose, skin will impress and 1/16th likely won't matter much.
Images in this review
Customer image Customer image Customer image
jetman
5.0 out of 5 stars They hold on tight!
Reviewed in the United States on December 3, 2024
I put this on the top section of my antenna mast. When I pulled on the cable to try and get any movement the collar stayed solid in place. Even tapping with a hammer didn't slide it at all. Good purchase!

Best Sellers in

 
 

BESTORQ B52 or 5L550 Rubber V-Belt, Wrapped, Black, 55" Length x 0.66" Width x 0.44" Height

4.3 4.3 out of 5 stars 239
9.71
 
 

BESTORQ A59 or 4L610 V-Belt, Classic Wrapped Rubber X3 V-Belt, Black, 61" Outside Circumference x .51" Width x .34" Height, P

4.5 4.5 out of 5 stars 852
7.96
 
 

VEVOR Linear Rail, 2 PCS SBR 20-2200mm, Linear Guideway Rail, and 4 PCS SBR20UU Square Type Carriage Bearing Blocks, Linear G

4.5 4.5 out of 5 stars 318
112.99
 
 

BESTORQ A35 or 4L370 V-Belt, Classic Wrapped Rubber X3 V-Belt, Black, 37" Outside Circumference x .51" Width x .34" Height, P

4.5 4.5 out of 5 stars 852
11.5
 
 

2PACK TIMKEN 6205-2RS Double Rubber Seal Bearings 25x52x15mm Pre-Lubricated and Stable Performance and Cost Effective Deep Gr

4.7 4.7 out of 5 stars 86
17.2
 
 

JQDML 24 Inch 24" Long Stroke Linear Actuator 12V Heavy Duty 3000N/660lbs Electric Actuator 0.2"/s with Mounting Brackets,for

4 4 out of 5 stars 69
111.99
 
 

BESTORQ AX32 Cogged V-Belt, Raw Edge X5 EPDM V-Belt, Black, 34" Outside Circumference x .51" Width x .34" Height, Pack of 1

4.7 4.7 out of 5 stars 75
11.22
 
 

BESTORQ B68 or 5L710 Rubber V-Belt, Wrapped, Black, 71" Length x 0.66" Width x 0.44" Height

4.3 4.3 out of 5 stars 1
11.24