2 Pack UCFL204-12 Pillow Block Bearing, Flange Mount Ball Bearing Unit, 3/4 in Bore, 2-Bolt Flange, Self Aligning Cast Iron H

4.4 4.4 out of 5 stars | 72 ratings

Price: 14.99

Last update: 01-02-2025


About this item

LONG-LASTING PERFORMANCE - Our 2 Pack UCFL204-12 bearing is made from ultra-durable bearing steel, ensuring that it can withstand even the toughest conditions and provide long-lasting performance.
LOWERS MAINTANENCE COSTS - The installed pillow bearing avoids repeated disassembly and repair of the bearing, reduces replacement frequency and maintenance costs
DOUBLE SEALING - The pillow bearing adopts a double layer seal, which has good sealing performance and does not allow impurities and water to enter, extending its service life
HIGH QUALITY - The pillow block bearing is made of bearing steel, which is more solid and durable, with high density, durability and long service life
WIDELY USED - Suitable for various mechanical fields such as textiles, motors, CNC machine tools, aerospace, industry, agriculture, metallurgy, chemical engineering, etc

From the brand

Previous page
Next page

Top reviews from the United States

Sky1
5.0 out of 5 stars Well made
Reviewed in the United States on December 4, 2024
Fit is good and heavy built. I like the fact it has a grease zerk
Xopher H
5.0 out of 5 stars these are great BUT
Reviewed in the United States on October 2, 2024
I recommend ordering several extras because this poor sellers inventory situation is a mess. I had to return several of these before I finally got the right size/correct part number.
Scott Hargrove
4.0 out of 5 stars good but odd sized grease fittings
Reviewed in the United States on September 15, 2024
I used these on the idler shaft on my old Delta 12" lathe. I had to cut off the two tabs to mount the bearings in the lathe's bearing holders, but that was quick and easy. I'll have to look for a grease gun tip that fits the half-sized fittings, though.
robert
5.0 out of 5 stars Really TIRED of PLASTIC....
Reviewed in the United States on June 19, 2024
Flimsy light weight bushings...SO upgraded my tractors steering, you know like wheel bearings, thrust bearings etc. etc.. However never got around to the big one, the steering collum...that's a main problem with pretty much all garden tractors. Critical parts are CHEAP, CHEAP, CHEAP made out of plastic. And there not cheap in cost, So I order this ball bearing to replace the cheesy plastic bushing one. I got TWO of them at a price of one crap plastic one...WHAT a diff it makes. like power steering time. If you want better steering. Like, man go for these they're a great value and super-fast delivery. Thanks Amazon and the seller!!!
Customer image
robert
5.0 out of 5 stars Really TIRED of PLASTIC....
Reviewed in the United States on June 19, 2024
Flimsy light weight bushings...SO upgraded my tractors steering, you know like wheel bearings, thrust bearings etc. etc.. However never got around to the big one, the steering collum...that's a main problem with pretty much all garden tractors. Critical parts are CHEAP, CHEAP, CHEAP made out of plastic. And there not cheap in cost, So I order this ball bearing to replace the cheesy plastic bushing one. I got TWO of them at a price of one crap plastic one...WHAT a diff it makes. like power steering time. If you want better steering. Like, man go for these they're a great value and super-fast delivery. Thanks Amazon and the seller!!!
Images in this review
Customer image
GCC
5.0 out of 5 stars Needs to have the mounting holes size listed.
Reviewed in the United States on May 13, 2024
I purchased these as better alternative to the junky end plate / bearing assemblies for my garage door whan I had to replace the torsion springs. There are plenty of replacement bearings listed for these end plates, but some end plates are impossible to remove the old bearing without a press and the correct intallation bushing; your only choice being to purchase new end plates with the same crappy bearings installed. The old plate assemblies were fastened with 5/16 bolts. The mounting I.D. on the block is a little over 5/8 but I was able to find nylon bushings to solve that issue. The self aligning is a huge plus as are the set screws to secure the bearing to the cross shaft.
My garage door is happy and quieter now.
Customer image
GCC
5.0 out of 5 stars Needs to have the mounting holes size listed.
Reviewed in the United States on May 13, 2024
I purchased these as better alternative to the junky end plate / bearing assemblies for my garage door whan I had to replace the torsion springs. There are plenty of replacement bearings listed for these end plates, but some end plates are impossible to remove the old bearing without a press and the correct intallation bushing; your only choice being to purchase new end plates with the same crappy bearings installed. The old plate assemblies were fastened with 5/16 bolts. The mounting I.D. on the block is a little over 5/8 but I was able to find nylon bushings to solve that issue. The self aligning is a huge plus as are the set screws to secure the bearing to the cross shaft.
My garage door is happy and quieter now.
Images in this review
Customer image
Natural*Engineer
1.0 out of 5 stars Center to center mounting hole dimensions WRONG!
Reviewed in the United States on October 23, 2024
I machined my base plate for these bearings based upon the listed dimension. It was WRONG! Caused me to rework. Unacceptable. Hopefully the bearings perform. PS.. I’m a retired mechanical engineer.
Zygmunt Wawrzyniak
5.0 out of 5 stars Very good product
Reviewed in the United States on August 18, 2024
Exactly as advertised
Sergio G.
4.0 out of 5 stars Feel good
Reviewed in the United States on January 30, 2024
Big holes to secure the base, the bearing in the base feels nice and tight, not loose, also feels greased already as it turns slow. It has one grease screw, i got the 3/4 inch inside diameter the measure it spot on,(i use my measuring tape)all metal except for the grease seals they seem pretty secured in their place. Overall feels like it will do its job.
Customer image
Sergio G.
4.0 out of 5 stars Feel good
Reviewed in the United States on January 30, 2024
Big holes to secure the base, the bearing in the base feels nice and tight, not loose, also feels greased already as it turns slow. It has one grease screw, i got the 3/4 inch inside diameter the measure it spot on,(i use my measuring tape)all metal except for the grease seals they seem pretty secured in their place. Overall feels like it will do its job.
Images in this review
Customer image Customer image Customer image Customer image

Best Sellers in

 
 

Goodyear AX41 Classical Raw Edge Industrial V-Belt, 43" Outside Circumference

4.7 4.7 out of 5 stars 255
12.6
 
 

XHF IP68 Nylon Cord Grip Waterproof NPT Cable Glands Assortment 20pcs UL Listed and RoHS Compliant Cable Strain Relief 1/4",

4.7 4.7 out of 5 stars 848
16.59
 
 

uxcell 6204 Deep Groove Ball Bearings 20mm Bore 47mm OD 14mm Thick CN Open Type Chrome Steel 2pcs

4.7 4.7 out of 5 stars 61
7.99
 
 

Jeremywell #35 Roller Chain Sprocket B Type 3/4" Bore Hardened 16 Tooth

4.6 4.6 out of 5 stars 40
12.92
 
 

Goodyear BX47 Classical Raw Edge Industrial V-Belt, 50" Outside Circumference

4.4 4.4 out of 5 stars 114
20.27
 
 

BESTORQ B31 or 5L340 V-Belt, Classic Wrapped Rubber X3 V-Belt, Black, 34" Outside Circumference x .66" Width x .43" Height, P

4.3 4.3 out of 5 stars 278
20.77
 
 

Tonmp 4 Pack UCP204-12 Pillow Block Mounted Ball Bearing - 3/4" Bore - Solid Cast Iron Base - Self Aligning …

4.3 4.3 out of 5 stars 46
21.99
 
 

Tanstic 330Pcs 16 Size Metric Precision Steel Bearing Steel Ball Assortment 1mm 2mm 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm 7

4.6 4.6 out of 5 stars 257
9.99