Teyleten Robot GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC SPI for Arduino 5pcs

4.3 4.3 out of 5 stars | 132 ratings

Price: 9.99

Last update: 12-25-2024


About this item

Brand new original ADXL345 chip, quality assurance
According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25°. Use ADXL345 digital output timing acceleration, etc., no timing
With high resolution (13 bits) measurement up to ±16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)
Communication method: IIC / SPI communication protocol
Up to ±16 g accelerometer with high resolution (13) measurement. Digital output

Product information

Technical Details

Collapse all
Other Technical Details

Top reviews from the United States

  • Amazon Customer
    5.0 out of 5 stars These ADXL345 Work as Expected - Maybe Even Better - Voron 2.4 R2 Printer Input Shaper
    Reviewed in the United States on January 26, 2023
    The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
    Current Time 0:00
    Duration 1:27
    Loaded: 6.90%
    Stream Type LIVE
    Remaining Time 1:27
     
    1x
    If you have a 3D printer and want to greatly improve the performance of the print quality, this is for sure your way to get the job done. There are a number of videos and web base help to figure out the wiring and process to interface these ADXL345 accelerometers to your printer to measure the frequencies and what process to include to cancel the vibrations out. By connecting the ADXL to a Raspberry Pi Pico, you can then connect to any other Raspberry Pi by USB connection to use this.

    All in all a great product that greatly improves 3D print quality using Input Shaping. Well worth a full 5 Stars!
    Customer image
    Amazon Customer
    5.0 out of 5 stars These ADXL345 Work as Expected - Maybe Even Better - Voron 2.4 R2 Printer Input Shaper
    Reviewed in the United States on January 26, 2023
    If you have a 3D printer and want to greatly improve the performance of the print quality, this is for sure your way to get the job done. There are a number of videos and web base help to figure out the wiring and process to interface these ADXL345 accelerometers to your printer to measure the frequencies and what process to include to cancel the vibrations out. By connecting the ADXL to a Raspberry Pi Pico, you can then connect to any other Raspberry Pi by USB connection to use this.

    All in all a great product that greatly improves 3D print quality using Input Shaping. Well worth a full 5 Stars!
    Images in this review
    Customer image Customer image Customer image Customer image Customer image
  • Makoto Schoppert
    5.0 out of 5 stars Great little accelerometer
    Reviewed in the United States on April 2, 2021
    I bought these to measure resonance levels from vibrations in a 3D printer (a feature in Klipper firmware). Hooked these up to a Raspberry Pi and they worked fine.
    Basically, the firmware vibrates the parts back and forth at various frequencies and using this accelerometer it can determine which frequencies move the most (resonant frequencies). It can then compensate for this and remove "ringing patterns" caused by resonance.
    The whole process worked fine using these accelerometers.

    Great price for these as well.
  • Amazon Customer
    5.0 out of 5 stars great module for a great price
    Reviewed in the United States on March 2, 2022
    These worked great to test acceleration on some of my 3d printers and cnc laser
  • J&E
    4.0 out of 5 stars seems to be very sensitive to vibration
    Reviewed in the United States on May 20, 2022
    Used this product for variety of projects and experiments. In one project, I used it as a level sensor to build a balance beam with an Arduino Nano and DC motors with small fan blades. I noticed that the motor speed seemed to cause the Y-axis readings to vary dramatically, increasing the variability proportional to motor speed. Other than that, it is an inexpensive and useful sensor for many of my projects.
  • Printing Up Gear
    5.0 out of 5 stars Klipper
    Reviewed in the United States on June 4, 2021
    Worked easily and as expected for Klipper auto resonance tuning. 3 printers done for cheap when compared to cost of 1 board from Adafruit costing around 20$ each or Sparkfun
  • Nathaniel Hatley
    5.0 out of 5 stars Works well with a Raspberry Pi 4 running Klipper
    Reviewed in the United States on November 11, 2021
    I use these for input shaper tuning with Klipper on my Ender 3 V2. They work great, no complaints.
  • colin senior
    3.0 out of 5 stars It’s a good thing they send you 3
    Reviewed in the United States on January 30, 2022
    It’s hot and miss with these. Out of the initial 3, only one worked. I needed 2. The replacement pack sent to me had 2 that were good so out of the 6, only 3 worked. Out of the 3 that did work, 1 is reporting values way different than the other 2. I’m not sure if these values mean anything yet but once I get my 3D printer back up and running, I will test them with the input shaper. The other 2 I did test with input shaper led to the same results. If your needing more than one or two, I suggest ordering at least 2 packs. Out of 6 you ought to be able to get a few working and just return the duds
  • Dave
    5.0 out of 5 stars Works exactly as they should
    Reviewed in the United States on August 24, 2021
    Got these for my Ender 6 to calibrate Klipper. I only needed one, but I guess I have spares now.

    • Best Sellers in

     
     

    8pcs Ultrasonic Sensor Module HC-SR04 with 4pcs Mounting Bracket Distance Sensor Compatible with Arduino Kit, for Mega2560, R

    4.7 4.7 out of 5 stars 453
    11.99
     
     

    EPLZON HC-SR04 Ultrasonic Module Distance Sensor fit for Arduino UNO MEGA Nano Robot XBee ZigBee (pack of 5 pcs)

    4.8 4.8 out of 5 stars 59
    9.99
     
     

    BRDRC AIR 3 Payload Airdrop System,Transport Release with Landing Gear Wedding Ring Thrower Fishing Bait Clip Delivery for DJ

    4.3 4.3 out of 5 stars 26
    29.99
     
     

    WWZMDiB 2Pcs HC-SR04 Ultrasonic Sensor Module for Arduino R3 MEGA Mega2560 Duemilanove Nano Robot XBee ZigBee (2Pcs HC-SR04 w

    4.4 4.4 out of 5 stars 97
    6.99
     
     

    YAGUMO [Drone Parts] 3.7V 2000mAh Battery Propeller for S136 Mini RC Drone Spare Parts S136 MAX GPS Avoidance Drone Accessori

    4.5 4.5 out of 5 stars 2
    52.74
     
     

    WRAPGRADE Skin Stickers Compatible with DJI Air 3 | Two Batteries (Coloration-X)

    4 4 out of 5 stars 1
    9
     
     

    Generic Shock Absorber Ball for Potensic ATOM SE Drone Only

    0 0 out of 5 stars 0
    9.99
     
     

    10PCS IIC I2C Logic Level Converter Bi-Directional Module 5V to 3.3V for Arduino

    5 5 out of 5 stars 2
    7.99