XiKe 10 Pack Blue 2" Nylon Garage Door Roller 4" Stem, Quiet/Durable and High Load, Use 6200-2RS Double Seals Precision Beari

4.8 4.8 out of 5 stars | 6,211 ratings

Price: 25.99

Last update: 02-12-2025


About this item

✔ Benefit - Effectively reduce more than 80% noise and durable.
✔ Bearing - 6200-2RS precision bearing Smooth rotation and high load.
✔ Seals - Excellent performance prevents dust and moisture from entering.
✔ Guarantee - No reason to return or refund for 3 years, don't worry about buying.
✔ Expert - Professional bearing manufacturing began in 1945.

Product information

Technical Details


Top reviews from the United States

  • AS
    5.0 out of 5 stars Excellent rollers
    Reviewed in the United States on January 28, 2025
    Wry good quality. Quieter and not hard to install. Just make sure you don’t hurt yourself when installing the very bottom one. Lift the door all the way up and lock it with something so it doesn’t slide down, then remove the cable and replace the roller, that way you don’t potentially get hurt from the cable tension when the door is all the down.
  • Surf06
    5.0 out of 5 stars EASY INSTALL, SMOOTH OPERATION
    Reviewed in the United States on December 5, 2024
    After researching competitors, I chose these because they are 6200-2RS bearings, as opposed to 6200-Z or 6200-ZZ. These 6200-2RS bearings have rubber seals on both sides of the bearing to reduce dust, dirt, and corrosion, enhancing durability and smooth operation. The 6200-Z or ZZ bearings have either one or two metal seals, which are not as effective.
    Watched a few YouTube videos, followed the recommendation to remove the hinges one by one EXCEPT the bottom hinge. Easy DIY process to mark the location with a sharpie, unbolt the hinge, replace roller and reinstall hinge. Bottom hinge is done by fully raising the door, slightly bending the track, and slipping the roller out, WITHOUT undoing any bolts. Reinstall with new rollers, bend the track back in position. I also took the time to thoroughly clean the track with 'Purple Power' degreaser, then re-lube with 3-in-1 Garage Door lubricant spray. Also adjusted the top rolled to better seal the top of the door.
    Now super quiet, total job about one hour. Well worth the investment.
  • Cedric Banks
    5.0 out of 5 stars Great wheels
    Reviewed in the United States on December 27, 2024
    This was my first time changing out garage door wheels and what a different it makes. The door is much quieter and smoother. They were relatively easy to install. Not simple but definitely not overwhelming. I would purchase again.
  • pgm
    5.0 out of 5 stars Quality Product
    Reviewed in the United States on December 25, 2024
    Replaced all rollers on garage door with these rollers very high quality. Watched videos on you tube to see best way to do it. Not to difficult now opening and close is much less noisy..
  • Jake Halliday
    4.0 out of 5 stars Manufacturing QC needs attention.
    Reviewed in the United States on January 15, 2025
    Compare images of rollers I received today with the images in the seller's listing. Taken before installing on second door. Installed a set yesterday. Easy job and definitely quieter than the 30 year old all steel bearings they replaced. Good value for money.
    Customer image
    Jake Halliday
    4.0 out of 5 stars
    Manufacturing QC needs attention.

    Reviewed in the United States on January 15, 2025
    Compare images of rollers I received today with the images in the seller's listing. Taken before installing on second door. Installed a set yesterday. Easy job and definitely quieter than the 30 year old all steel bearings they replaced. Good value for money.
    Images in this review
  • Michael Raney
    5.0 out of 5 stars they work great
    Reviewed in the United States on February 5, 2025
    After watching several videos, I ordered these. it was straight forward job to change them out. really took the noise out of operating the door.
  • Daniel Sherer
    5.0 out of 5 stars Awesome! Easy/cost-effective way to quiet your garage and extend the motor's life!
    Reviewed in the United States on January 24, 2025
    My garage door was installed years ago, before I bought the house. I always tried to keep the track lubed because the old metal rollers didn't seem to have bearings. But it was still pretty noisy when opening/closing the door.

    After watching a YouTube video on how easy it is to replace these (and safe), I decided to give it a shot. They only come in one size, but you can select a color (who cares?) and the number of rollers you need. You do NOT have to take your door off to replace these and you should NOT (ever) mess with the spring mechanism (potentially lethal and NOT required for this project). Find a video on YT and watch it. It took me about 10 minutes. The only tool needed was a socket wrench and a sharpie to outline each bracket so you get it back in exactly the right spot.

    These rollers have bearings (so they don't depend on lube in the track) and they have polyurethane wheels instead of metal. The door is noticeably quieter and smoother now, and that's gotta be good for extending the life of the mechanism.
  • EclipseDiver
    5.0 out of 5 stars Five Stars and Easy DIY
    Reviewed in the United States on May 7, 2024
    I had the best experience with these nylon rollers and sealed bearings. The fit was excellent and so easy to install because I was also replacing the lower side rails at the same time. It went like this first I pulled the cord to disengage the drive motor assembly, a must unless you are looking for a serious injury from the tension springs. Take a picture of your hinges so you can replace them in exactly the correct roller housings. From there I removed one side rail and that allowed me to remove and replace all of rollers on that side with the lower rail off. I cut off 1/4" off of the new rail before finally installing the rail. The reason for that is my rails were badly rusted where they touched the concrete. It snows in MN and salt will rust your rails. Spray bottom of the cut off rails with WD-40 to seal the cut rails. They no longer make contact with the concrete so they will never rust. Mark the location of your sensors to be able to reinstall more quickly and accurately. Move over to the other side and and repeat. No need to completely remove the rails from the walls, just where they make contact with metal. These rails are supposed to be installed at an angle closer to the garage door opening at the bottom, to close the tightly. If you want to really put the cherry on top of your job one can also install locking plastic sleeves on the stems of the new nylon rollers to make your garage door close to totally silent. Between the replacement of the lower side rails, replacing the 2" nylon rollers with the locking plastic nylon sleeves on the roller stems, it's as possibly silent as a belt driven garage door can be. The price for silencing the garage door was easy and incredibly reasonable especially for a couple of DIY hours. Five Stars and extreme personal satisfaction!

    • Best Sellers in

     
     

    HBTower 3 Step Ladder, 3 Step Stool for Adults, 3 Step Ladder Folding Step Stool with Cushioned Handle Step Ladder with Wide

    4.5 4.5 out of 5 stars 366
    39.99
     
     

    Google Nest Learning Thermostat (4th Gen, 2024) with Nest Temperature Sensor - Energy Saving Smart Thermostat with Adaptive E

    4.4 4.4 out of 5 stars 654
    219.99
     
     

    Honeywell Home Smart Color Wi-Fi Programmable Touch Screen Thermostat, Energy Star, Alexa Ready, White - C-Wire Required, Not

    4.3 4.3 out of 5 stars 1,292
    173.99
     
     

    Black Diamond Ultimate Grout Cleaner: Best Cleaner for Tile,Ceramic,Porcelain, Marble Acid-Free Safe Deep Cleaner & Stain Rem

    4 4 out of 5 stars 12,328
    19.99
     
     

    Simply 16x25x1 Air Filter, MERV 8, MPR 600, 6 Pack, For Home AC Furnace & HVAC (Actual Size: 15.75"x24.75"x0.75") DUST, Pet,

    4.7 4.7 out of 5 stars 40,819
    35.33
     
     

    Filterbuy 20x20x1 Air Filter MERV 13 Optimal Defense (4-Pack), Pleated HVAC AC Furnace Air Filters Replacement (Actual Size:

    4.6 4.6 out of 5 stars 20,861
    38.7
     
     

    Filterbuy 16x25x1 Air Filter MERV 11 Allergen Defense (4-Pack), Pleated HVAC AC Furnace Air Filters Replacement (Actual Size:

    4.6 4.6 out of 5 stars 21,855
    37.96
     
     

    Taranta 2 Step Ladder,Aluminum Lightweight Folding 2 Step Stool with Anti-Slip Wide Pedal, 330lbs Capacity Step Ladder for Ho

    4.7 4.7 out of 5 stars 430
    37.99